Quantcast
  1. See Detail

Caware 0.1 Micron 3-in-1 Sediment, Chemical + Bacteria Reduction Filter | 10" x 2.5" (GT42-0-MAF)

SKU
GT42-0-MAF
In stock
Quick Overview
  • 0.1 Absolute Micron Filters Sediment, Chemical + Bacteria
    • Sediment & Turbidity Reduction with 5-10 Micron Pleated Membrane
    • Chemical Reduction with 5 Micron Premium Coconut Carbon Block
    • Bacterial Reduction with 0.1 Micron Hollow Fibre Membrane
  • Rapid Gravity Flow Handles Low Pressure @ 4 Litres Per Minute 
  • Independently Lab Tested For Log8 Reduction of E.Coli & P.Aeruginosa Bacteria
  • Compliant to National Sanitation Foundation/ANSI Standard No. 42 & 53, FDA and EU Food Grade Requirements
$120.00
4 Interest Free Payments of $30.00

Caware 0.1 Micron 3-in-1 Sediment, Chemical & Bacteria Reduction Filter | 10" x 2.5" | (42-0-MAF)

  • 0.1 Absolute Micron Filters Sediment, Chemical + Bacteria
    • Sediment & Turbidity Reduction with 5-10 Micron Pleated Membrane
    • Chemical Reduction with 5 Micron Premium Coconut Carbon Block
    • Bacterial Reduction with 0.1 Micron Hollow Fibre Membrane
  • Rapid Gravity Flow Handles Low Pressure @ 4 Litres Per Minute 
  • Independently Lab Tested For Log8 Reduction of E.Coli & P.Aeruginosa Bacteria
  • Compliant to National Sanitation Foundation/ANSI Standard No. 42 & 53, FDA and EU Food Grade Requirements

This cartridge is ideal for tank water applications, filtering out sediment and silt, followed by chemical reduction down to 5 microns using a 100% Coconut Carbon Block to reduce chlorine, volatile organic chemicals, pesticides and hazardous chemicals, and finishing with a 0.1-micron filtration to protect against bacteria, viruses and parasitic cysts like Giardia & Cryptosporidium. Enjoy the sweet, mild taste of water as it should be!

Technical Specifications

  • Operating Pressure: 10-120psi (0.7-.2 bar)
  • Operating Temperature: 2-38°C (Cold Water Application Only)
  • Operating Flow Rate: 4 Litres Per Minute
  • Lifespan: 6000L @ 80% Chlorine Reduction and 12000L @ 50% Chlorine Reduction.

Disclaimer: Do not use with microbiologically unsafe water or water of unknown quality without adequate disinfection. We recommend dosing your tank with a product such as Hydrosil Ultra 7.5% Water Sanitiser to ensure full protection against microbiological contamination in your pipework and filter system, and to help prevent biofouling within the filter. 

More Information
Type Water Filter

Technical Specifications

  • Operating Pressure: 10-120psi (0.7-.2 bar)
  • Operating Temperature: 2-38°C (Cold Water Application Only)
  • Operating Flow Rate: 4 Litres Per Minute
  • Lifespan: 6000L @ 80% Chlorine Reduction and 12000L @ 50% Chlorine Reduction; Replace every 12 months or as required.

Return Policy

Due to the nature of the products we sell, a strict return policy is in place. We work with food grade certified materials that must be un-opened and un-used as to be able to be re-sold.

You may receive a refund or credit of equal amount, less the restocking fee if applicable and any other deductions that are relevant. 

  • Wrongly purchased items may be returned for a merchandise credit, this applies for but not limited to: Wrong size, wrong system etc.
  • 30 Day return Policy:  Returns will not be accepted without prior approval or after 30 days of invoice date.
  • All returns will incur a 17.5% restocking fee or cost to send the item to you whichever greater. FSA may use discretion to determine the restocking fee.
  • Any damages (minor, that can be repaired) will incur a fee which will be deducted from the total refund which will be equal to the cost of the replacement 
    parts (List Price) and labour charge (if applicable) to repair the system(s). This will be separate to the restocking fee.
  • Any damage considered to be major and not feasible for repair may be refused and the return request will be void. The customer will be responsible for the return freight or disposal of the damaged unit.
  • Return shipping is to be paid by the buyer to the address provided. It is recommended that the customer applies transit warranty to the return freight in case of damage.
  • Any damages to the system that were not reported to FSA within 48 business hours of receipted delivery are not covered under our transit warranty.

 

  • Should the item appear faulty or doesn’t work how described, the unit/item must be returned for testing (if requested), the return postage paid by the buyer. If the unit/item is deemed to be faulty, compensation will be provided for the postage cost (Proof of cost required). If the unit/item is deemed to be in working order and as described, the buyer will responsible for return postage. 

 

If you have any questions about our return policy, please contact us before purchase. This will also help to ensure you purchase the correct product that suits your requirements.


apex-logo
jg-logo
pentak-logo
Haycarb-logo
omnipure-logo
uvg-logo
pure-lite-logo
Hydrasil-logo
Blue-logo
Molytec-logo
FSA-de-min-logo
THERMAX-logo