Quantcast

FREE SHIPPING AUSTRALIA WIDE

Free shipping on all retail orders

AUSTRALIAN OWNED & OPERATED

Licenced WaterMark Supplier

10" x 2.5" Clear Light Duty Polycarbonate Water Filter Housing with 1/4" Female NPT Ports (GT8-38)

In stock
SKU
GT8-38
$58.00
Quick Overview
  • 10" x 2.5" Filter Housing With A Clear Polycarbonate Bowl
  • Flat White Cap With 1/4" female NPT Inlet And Outlet Ports
  • See The Cartridge And The Water Inside At A Glance
  • Maximum Pressure 350 kPa
  • For Direct Flow Applications, Not For Plumbing In
  • Cartridge Not Included.
  • Bracket (GT0-1W) And Spanner (GT17-0S) Sold Separately
- +

Clear Polycarbonate Filter Housing | 10" x 2.5" | 1/4" Female NPT

A 10" x 2.5" filter housing with a clear polycarbonate bowl, a flat white cap and 1/4" female NPT inlet and outlet ports. The clear bowl lets you see the cartridge and the water inside at a glance.

What you need

  • No cartridge is included. The housing takes a 10" x 2.5" cartridge.
  • Mounting bracket sold separately: Single white powder coated steel bracket and screws (GT0-1W).
  • Housing spanner sold separately: GT17-0S.

For direct flow applications, not for plumbing in

This housing is made for direct flow applications. It is not designed to be plumbed in to a building's water supply or left under constant pressure. Turn the supply off when it is not in use.

The maximum pressure is 350 kPa. If it runs under pressure, it must be fitted with a pressure limiting valve set no higher than 350 kPa.

Fitting the housing

  • Seal the 1/4" female NPT threads with thread tape only.
  • Do not use a thread sealant on this housing. Using a thread sealant voids the warranty.
  • Turn off the supply and release the pressure before opening the housing.

For the full specification, see the Specs/Performance tab.

Specification

Housing size 10" x 2.5"
Bowl Clear polycarbonate
Cap White, flat
Ports 1/4" female NPT, inlet and outlet
Maximum pressure 350 kPa
Use Direct flow applications only, not for plumbing in
Thread sealing Thread tape only
Cartridge Not included
Mounting bracket GT0-1W / SS, sold separately
Housing spanner GT17-0S, sold separately

Usage Guidelines

  • Direct flow applications only. Not designed to be plumbed in or left under constant pressure.
  • Turn the supply off when the housing is not in use.
  • If it runs under pressure, fit a pressure limiting valve set no higher than 350 kPa.
  • Thread tape only. Using a thread sealant voids the warranty.

Return Policy

Due to the nature of the products we sell, a strict return policy is in place. We work with food grade certified materials that must be un-opened and un-used as to be able to be re-sold.

You may receive a refund or credit of equal amount, less the restocking fee if applicable and any other deductions that are relevant.

  • Wrongly purchased items may be returned for a merchandise credit, this applies for but not limited to: Wrong size, wrong system etc.
  • 30 Day return Policy: Returns will not be accepted without prior approval or after 30 days of invoice date.
  • All returns will incur a 17.5% restocking fee or cost to send the item to you whichever greater. FSA may use discretion to determine the restocking fee.
  • Any damages (minor, that can be repaired) will incur a fee which will be deducted from the total refund which will be equal to the cost of the replacement
    parts (List Price) and labour charge (if applicable) to repair the system(s). This will be separate to the restocking fee.
  • Any damage considered to be major and not feasible for repair may be refused and the return request will be void. The customer will be responsible for the return freight or disposal of the damaged unit.
  • Return shipping is to be paid by the buyer to the address provided. It is recommended that the customer applies transit warranty to the return freight in case of damage.
  • Any damages to the system that were not reported to FSA within 48 business hours of receipted delivery are not covered under our transit warranty.

  • Should the item appear faulty or doesn’t work how described, the unit/item must be returned for testing (if requested), the return postage paid by the buyer. If the unit/item is deemed to be faulty, compensation will be provided for the postage cost (Proof of cost required). If the unit/item is deemed to be in working order and as described, the buyer will responsible for return postage.

If you have any questions about our return policy, please contact us before purchase. This will also help to ensure you purchase the correct product that suits your requirements.