Free shipping on all retail orders


Licenced WaterMark Supplier

16L Alkaline Benchtop Tap Water Filter Purifier| Multi-Stage Ceramic, Activated Carbon, Minerals| Gravity Fed (GT1-17)

In stock
Quick Overview
  • Add Essential Minerals to your Drinking Water with the 16L Remineralising Benchtop Water Filter
  • Ideal for use with Chlorinated Tap Water
  • Gravity Flow + Re-Fillable - Easy to Set Up & Maintain - No Plumbing Required
  • Reduces Tastes & Odours + Imparts a Subtle Sweetness
  • Ceramic Filters Fine Sediment down to 0.5 Micron Down (Nominal)
  • Activated Carbon Filters common Tap Water Chemicals such as Chlorine, Disinfection By-Products, Trihalomethanes (THMs such as Chloroform and Bromoform), Volatile Organic Compounds (VOCs such as Pesticides & Herbicides)
  • Multiple Alkaline Mineral Media Steps including Maifan Stone & Negative Ion Mineral Balls to Naturally Boost pH and Neutralise Acidity
- +

16L Alkaline Benchtop Tap Water Filter Purifier| Multi-Stage Ceramic, Activated Carbon, Minerals| Gravity Fed (GT1-17)

NEW To Our Range Of Alkaline Gravity Feed Purifiers

  • Advanced & Professional concept of design with the forming principle of natural mineral water.
  • Up to 10 Stages Of Filtration & Remineralisation - Activating water with Negative Ion Mineral Balls.
  • User Friendly - Easy to install, service and clean.
  • Add the balance of minerals and maintain an alkalinity - improves mineral value.
  • Increases Dissolved Oxygen and removes excess acid wastage - improving metabolism.
  • suitable for personal, household and office use 
  • NOTE: Do not Fill Above the Join between Tank 1 & 2
  • 16L Remineralising Benchtop Water Purifier
  • Adds Essential Minerals Back to Drinking Water
  • Neutralises Acidic pH - Alkaline Water Filter
  • Giardia rated Ceramic - Silver Impregnated 
  • FAR Infrared, Tourmaline, Negative Ion, Maifan Stone Remineraliser.

Top Tank Capacity approx. 5.5 Litres (Without Ceramic Dome Filter Installed)

Botttom Tank Capacity approx. 10.5 Litres (Without filters installed)

Please note that you cannont completely fill both bottom and top tanks at the same time 

This filter is not to be used with water that is microbiologically unsafe, if you require a system that needs to disinfect water please contact us first 



  1. Unpack the system from the package and unwrap all filters.
  2. Assemble the white base and the bottom tank, also install the tap.
  3. Rinse the Mineral Pad & Mineral Balls (if applicable) in clean water then let them soak for 10 minutes, rinse again in clean water.
  4. Place the mineral Pad in the bottom of the tank in the centre. When using mineral balls, spread them evenly around the mineral pad. 
    NOTE: Leave a small area clear near the tap to avoid the stones blocking the tap.
  5. Rinse the 5 Multi Media cartridge under running water to clear any fine particles then soak in clean water for 10 minutes, give a final rinse.
  6. Screw the cartridge into the white joiner piece and afix to the bottom tank.
  7. Rinse the Ceramic dome filter in running water and use a kitchen scourer to lightly scrub the surface of the filter. Run water from the tap directly down through the stem of the filter to flush out any internal dust and air particles.
  8. Soak the ceramic in water (overnight is best) then give it a final rinse off and install into the top housing.
  9. Assemble the system then fill the top tank with water and allow it to filter through.

Disclaimer: Do not use or drink microbiologically unsafe water or water of unknown quality without adequate disinfection. Do not store the unit near natural sunlight (i.e. keep away from a kitchen window), otherwise, algae can start to grow inside the lower tank! (Remember: Carbon removes Chlorine, which is a disinfecting agent). Wash tanks regularly and air dry only.

Bio Ceramic 'Korea Ceramic' Dome

Stage 1: Bio Ceramic 'Korea Ceramic' Dome

This cartridge consists of highly compressed ceramic diatom This stage ensures that the water is free from sediments, solid impurities The filter is manufactured under extremely high temperatures to ensure a perfect mould, after which it undergoes strict quality control.

Stage 2: Activated Carbon

The larger quantity of carbon absorbs the majority of Chlorine, THM's, and other organic Chemicals from the water including herbicides and pesticides. The Low flow rate allows also for the removal of chloramines.

Stage 3: FAR Mineralising Ball

This stage of filtration activates the water molecules, enriching the minerals in the water promoting good health.

Stage 4: Silica Sand

Silica sand removes acidic substances from the water helping balance low pH issues.

Stage 5: Post Activated Carbon

This stage of Activated Carbon acts as a polishing stage where the re-activated water has any residual impurities removed - leaving the water with a smooth crisp taste.

Stage 6: Mineral Sand Blend

This component releases various minerals that convert the water to a mild alkaline state without compromising the waters taste.

Stage 7: Maifan Stone Mineral Pad

Ceramic Stone Mineral Pad

These stones are mined several hundred meters below sea level in an unpolluted and isolated island in Korea. These stones contain Germanium, which promotes good health and helps in preventing cancer. This substance also absorbs heavy metals, toxins, odours and other impurities, while simultaneously releasing more than 30 other kinds of minerals. This highly porous mineral stone significantly aids in the oxygenation of water and in adjusting the pH levels of the water to mild alkaline.

When Purchased with Mineral Balls:

Mixed Mineral Balls

Stage 8: Tourmaline Energy Balls (White)

Tourmaline Ceramic Balls release up to 0.06mA of Bioelectricity into the water and help break down bigger molecule groups of water to smaller ones to activate the water. It radiates more than 85% FIR (Far infrared ray). providing a mild alkaline pH. Tourmaline has antibacterial properties allowing the water to be stored for longer time periods.
Tourmaline releases two negative ions (Hydroxyl and Hydronium), it also helps soften the water reducing the maintenance to the lower tank.

Stage 9: Negative Ion Balls (Grey)

Negative ion ceramic balls are made from natural stones through the nanometer processing which can be continuously produced negative ions, widely used in industry, food industry, water treatment, home and the environment clean.

Negative ion ceramic ball has smooth surface without dust and precipitates while dipping in water. Test proved that negative ions can release 1000 / CM3 ~ 20000/CMaccording to the different demand.

By adding negative ions ceramic ball in drinking water, the water can kill bacteria, increase dissolved oxygen, and activate water. Negative ion ceramic ball can also be used for water heaters in bathrooms to make oxygen-rich water and increase air negative ion concentration.

Stage 10: FIR Ceramic Balls (Red)

Far infrared ceramic balls release weak electric current in the process of treating water, although this is very weak current (0.06 mA), but it’s same with the body's biological, which have a beneficial impact on human and other organisms, it has an effective adsorption of lead (Pb + +) Chromium (Cr + +) and other toxic heavy metals. Meanwhile, the far-infrared mineralisation can release the far-infrared ray which can have resonance with water molecules, this enables the water into small molecule groups and increase the oxygen content of water.

Long-term drinking water filtrated by this product, we not only can gain zinc lithium, iodine, selenium and other trace elements that our bodies needed, but also regulate organisms micro circulation, improve the body's immune capacity of a health care. The emission rate of FIR(far infrared ray) ceramic ball can reach more than 90%,more than 20 kinds of trace elements necessary for the human body will slowly and evenly released which makes more useful minerals for water.

FIR Ceramic Balls

Filter Replacement Times & Links

Ceramic Dome Filter (12 Months) - CLICK HERE

5 Stage Cartridge (6 Months) - CLICK HERE

Maifan Stone Mineral Pad (12 Months) - CLICK HERE

Replacement Mineral Balls (12 Months) - CLICK HERE


Please keep in mind this WILL NOT REMOVE FLUORIDE. If fluoride is a concern to you please look at our reverse osmosis systems section in our store.




Disclaimer: Do not use or drink microbiologically unsafe water or water of unknown quality without adequate disinfection.

If your water source is Rain/Tank Water and Potable Bore Water (*i.e bore water that has been tested to the Australian Drinking Water Guidelines and deemed suitable for drinking purposes per the Guidelines’ aesthetic, health and safety recommendations), please see below our recommended filtration schedule to ensure safe drinking water:

  1. Dose your Rain Water Tank with HydroSil Ultra 7.5% for Protection Against Bacteria & Viruses
  2. Sediment + Carbon Pre-Filtration for Aesthetic Improvements of Taste & Odour Molecules
  3. <1 Micron Absolute Filtration for Protection against Parasites

Read on for a full explanation of why we recommend this as the minimum standard of filtration for treating Rain/Tank/Potable Bore Water for drinking purposes.

For Protection Against Bacteria/Viruses

Bacteria (such as E.Coli and Cholera) can colonize in stagnant water and result in harmful illnesses when consumed.
For sanitation against common water-borne bacteria/viruses in rainwater and potable bore water*, we, therefore, recommend dosing your tank with a product such as Hydrosil Ultra 7.5% Water Sanitiser to ensure protection against microbiological contamination/biofouling in your filter system.

HydroSil is a food-grade silver and hydrogen-peroxide based water sanitiser, which acts to oxidise bacteria and viruses without leaving any dangerous residues behind. HydroSil sanitizes and protects your tanks and water storage devices, making rainwater and potable bore water* safe and suitable for human consumption. HydroSil is not a chlorine-based chemical like most sterilisers on the market today. It is non-toxic, and safe to use around your home and family.

Dosage Rate: HydroSil should be dosed at a rate of 2L per 10KL of water. Leave to stand for 40 minutes of contact time before use.

HydroSilBuy Hydrosil Ultra

Buy Hydrosil Ultra 7.5% Here:


Height: 60cm
Depth: 36cm
Width: 31cm

Capacity: 16L (Combined Capacity)

Return Policy

Due to the nature of the products we sell, a strict return policy is in place. We work with food grade certified materials that must be un-opened and un-used as to be able to be re-sold.

You may receive a refund or credit of equal amount, less the restocking fee if applicable and any other deductions that are relevant.

  • Wrongly purchased items may be returned for a merchandise credit, this applies for but not limited to: Wrong size, wrong system etc.
  • 30 Day return Policy: Returns will not be accepted without prior approval or after 30 days of invoice date.
  • All returns will incur a 17.5% restocking fee or cost to send the item to you whichever greater. FSA may use discretion to determine the restocking fee.
  • Any damages (minor, that can be repaired) will incur a fee which will be deducted from the total refund which will be equal to the cost of the replacement
    parts (List Price) and labour charge (if applicable) to repair the system(s). This will be separate to the restocking fee.
  • Any damage considered to be major and not feasible for repair may be refused and the return request will be void. The customer will be responsible for the return freight or disposal of the damaged unit.
  • Return shipping is to be paid by the buyer to the address provided. It is recommended that the customer applies transit warranty to the return freight in case of damage.
  • Any damages to the system that were not reported to FSA within 48 business hours of receipted delivery are not covered under our transit warranty.

  • Should the item appear faulty or doesn’t work how described, the unit/item must be returned for testing (if requested), the return postage paid by the buyer. If the unit/item is deemed to be faulty, compensation will be provided for the postage cost (Proof of cost required). If the unit/item is deemed to be in working order and as described, the buyer will responsible for return postage.

If you have any questions about our return policy, please contact us before purchase. This will also help to ensure you purchase the correct product that suits your requirements.