1. See Detail

BOSCH ULTRACLARITY 9000077095 9000077096 9000077104 9000194412 1014430109 30-14B

In stock
4 Interest Free Payments of $10.13
Wholesale Price Break refresh image
Select Quantity Discount Price per piece
2-2 10% $36.50
3-3 18% $33.33
4+ 23% $31.50

Drink Up ULTRACLARITY 9000077095 Filter

Replaces The Following Part Numbers

BOSCH - 9000077095 9000077096 9000077104 9000194412 1014430109 644845

Filter Features

  • Economical alternative to expensive substitutes
  • Delivers clean, clear water that looks and tastes great
  • Will remove or reduce Chlorine, Tastes and Odours that may be present in your drinking water
  • Designed to provide up to six months approx of life
  • Reduced Lead and Other dangerous Heavy Metals
  • Compliant to NSF/ANSI 42 (For materials requirements only)
  • Performance Tested By WQA & Compliant to NSF/ANSI 53 For Reduction Of Heavy Metals, Cysts & VOC's

This filter should not be used with water that is micro-biologically unsafe or of unknown quality, without adequate disinfection before and/or after the filter.


Twist the old filter 1/4 Turn Counter-clockwise

pull the filter straight out and discard (the water will shut off automatically)

  1. NOTE: Filter must be pushed firmly into receiver and turned until filter is locked in place. If filter has not locked correctly, water will not flow.
  2. DO NOT use any tools to install this filter
  3. Shut Off Water Supply
  4. Twist the old filter a quarter turn counterclockwise and remove.
  5. Insert new filter into the receiver and push until it stops.
  6. twist filter a quarter turn clockwise
  7. Reset water filter display
  8. Flush filter with 15L of water until it runs clear NOTE: Some noise is not uncommon as air is purged from the system.

Specifications and Instructions:

Flush approx 15L of water through this water filter cartridge before use. Replace Every 6 Months
Flow Rate: 1.9L/Min
Operating Temperature: 0.6°C - 38°C
Min Operation Pressure: 207kPa (30 psi)
Max Operating Pressure: 862kPa (125 psi)
Filter Life: 6 Months or 1,150L

Reduces the Following:

98.00% 2,4-Dichlorophenoxyacetic Acid
99.00% Alachlor
99.00% Asbestos
94.00% Atrazine
96.00% Benzene
98.00% Carbofuran
96.00% Chlorine Taste & Odour
99.99% Cysts (Giardia)
99.00% Lead
99.00% Lindane
93.00% Mercury
99.00% P-Dichlorobenzene
99.10% Class 1 Particulates
94.00% Pharmaceuticals
93.00% Toxaphene
98.00% Turbidity


More Information
Type Water Filter

Return Policy

Due to the nature of the products we sell, a strict return policy is in place. We work with food grade certified materials that must be un-opened and un-used as to be able to be re-sold.

You may receive a refund or credit of equal amount, less the restocking fee if applicable and any other deductions that are relevant. 

  • Wrongly purchased items may be returned for a merchandise credit, this applies for but not limited to: Wrong size, wrong system etc.
  • 30 Day return Policy:  Returns will not be accepted without prior approval or after 30 days of invoice date.
  • All returns will incur a 17.5% restocking fee or cost to send the item to you whichever greater. FSA may use discretion to determine the restocking fee.
  • Any damages (minor, that can be repaired) will incur a fee which will be deducted from the total refund which will be equal to the cost of the replacement 
    parts (List Price) and labour charge (if applicable) to repair the system(s). This will be separate to the restocking fee.
  • Any damage considered to be major and not feasible for repair may be refused and the return request will be void. The customer will be responsible for the return freight or disposal of the damaged unit.
  • Return shipping is to be paid by the buyer to the address provided. It is recommended that the customer applies transit warranty to the return freight in case of damage.
  • Any damages to the system that were not reported to FSA within 48 business hours of receipted delivery are not covered under our transit warranty.


  • Should the item appear faulty or doesn’t work how described, the unit/item must be returned for testing (if requested), the return postage paid by the buyer. If the unit/item is deemed to be faulty, compensation will be provided for the postage cost (Proof of cost required). If the unit/item is deemed to be in working order and as described, the buyer will responsible for return postage. 


If you have any questions about our return policy, please contact us before purchase. This will also help to ensure you purchase the correct product that suits your requirements.