Quantcast
  1. See Detail

pH Booster Filter Media | USA Made Magnesium (MgO) 22.68kg Bag

SKU
GT5-15
In stock
Quick Overview
  • 22kg Bag of High-Quality USA Made - Directly imported from the US
  • Magnesium Oxide based water alkalising filter media
  • Mainly for use in conjunction with a calcite filter where the incoming pH of the water is below 5 pH
$300.00
4 Interest Free Payments of $75.00

pH Booster Filter Media | USA Made Magnesium (MGO)

  • 22kg Bag of High Quality USA Made - Directly imported from the US
  • Magnesium Oxide based water alkalising filter media
  • Mainly for use in conjunction with a calcite filter where the incoming pH of the water is below 5 pH

Please contact us prior to ordering pH Booster Filter Media. This will ensure that you are receiving the correct product for your intended purpose.

If you are considering a Calcite Vessel as part of your tank filtration set up AND the pH of your tank water is below pH. 5, you may need to add pH Booster Filter Media (Magnesium) to get the correct final pH. Adding pH Booster Filter Media to water with a pH below 5 alters the water chemistry to enable the uptake of Calcite (Calcium). For this intended use you will see the pH range anywhere from neutral (7-7.2pH) up to high alkaline (8-9.5) depending on the pH of the incoming water.

We would recommend using a carbon post-filter either for drinking or on a whole-house basis, as magnesium can leave a slight residual metallic taste in the water. This taste is easily removed by carbon which will produce clean, sweet-tasting water.

Using Magnesium & Calcite Together

Calcite and Magnesium are two common types of filter media used for pH adjustments in Rain or Bore Water. These types of media will slowly dissolve into the water over time which will mean that they require replenishment to maintain high flow rate capacity.

  • When first using a pH filter media, follow the same backwash and rinse cycles as mentioned in the system instruction manual.
  • In cases where Magnesium and Calcite are used together, add the calcite to the vessel first, then add the Magnesium on top. Ensure that you do not overfill the vessel.
    • If the pH is around 5, fill the vessel with a ratio of 75kg (3x 25kg boxes) of Calcite to 7.5kg (approx. 1/3 bag) of Magnesium.
    • If the pH is around 4.5, fill the vessel with a ratio of 71.25kg Calcite to 10-12kg (approx. 1/2 bag) of Magnesium.
  • Test your pH ongoing and add more filter media when the pH drops below the minimum desired level (6.8 pH).

Due to the weight of this item, freight will need to be calculated to ensure that the freight cost is accurate for your location. We are able to post Australia Wide.

You can contact us through message or by phone on 1300 888 008 to provide the information.

Please include Street, Suburb, State, and Postcode (NO PO BOXES).

Return Policy

Due to the nature of the products we sell, a strict return policy is in place. We work with food grade certified materials that must be un-opened and un-used as to be able to be re-sold.

You may receive a refund or credit of equal amount, less the restocking fee if applicable and any other deductions that are relevant. 

  • Wrongly purchased items may be returned for a merchandise credit, this applies for but not limited to: Wrong size, wrong system etc.
  • 30 Day return Policy:  Returns will not be accepted without prior approval or after 30 days of invoice date.
  • All returns will incur a 17.5% restocking fee or cost to send the item to you whichever greater. FSA may use discretion to determine the restocking fee.
  • Any damages (minor, that can be repaired) will incur a fee which will be deducted from the total refund which will be equal to the cost of the replacement 
    parts (List Price) and labour charge (if applicable) to repair the system(s). This will be separate to the restocking fee.
  • Any damage considered to be major and not feasible for repair may be refused and the return request will be void. The customer will be responsible for the return freight or disposal of the damaged unit.
  • Return shipping is to be paid by the buyer to the address provided. It is recommended that the customer applies transit warranty to the return freight in case of damage.
  • Any damages to the system that were not reported to FSA within 48 business hours of receipted delivery are not covered under our transit warranty.

 

  • Should the item appear faulty or doesn’t work how described, the unit/item must be returned for testing (if requested), the return postage paid by the buyer. If the unit/item is deemed to be faulty, compensation will be provided for the postage cost (Proof of cost required). If the unit/item is deemed to be in working order and as described, the buyer will responsible for return postage. 

 

If you have any questions about our return policy, please contact us before purchase. This will also help to ensure you purchase the correct product that suits your requirements.


apex-logo
jg-logo
pentak-logo
Haycarb-logo
omnipure-logo
uvg-logo
pure-lite-logo
Hydrasil-logo
Blue-logo
Molytec-logo
FSA-de-min-logo
THERMAX-logo