1. See Detail

10x John Guest® BPEX 12mm Tubing Inserts Hot Water Use WaterMark TSM12 10-131WM

SKU
GT10-131WM x10
In stock
A$10.00
or 4 interest-free payments of $2.50
Learn more

John Guest® PEM Fitting Range

The PEM Range of 12mm metric size fittings are manufactured in white X-Linked Poly-ethylene. They are designed to meet the rigours of caravan hot water. Being especially produced for hot water domestic and commercial plumbing, the fittings are durable whilst being completely demountable and meet Australian WaterMark Certification.

John Guest® Twist & Lock™ Range

Speedfit Fittings have a unique grip then seal construction, made up of a collet with stainless steel teeth to grip the pipe and an O-ring to provide a permanent leak proof seal.
When connecting Speedfit Pipe to a Speedfit Fitting, be sure to always use a pipe insert to strengthen the connection for use on hot water.
The head of the insert has been designed for ease of insertion.
The additional benefit of the John Guest Twist & Lock Fittings is that a twist of a screw cap locks the pipe in position and gives increased compression to the O-ring for even greater security. This eliminates the need for locking rings to secure the collet.

Making a Good Connection

Prepare the Pipe:

Ensure the pipe end is free from score marks. Cut the pipe square using a tube cutting device. To prevent damage to the fitting, remove and burs from the end of the tubing/pipe. When using tube inserts, a twisting motion will aid the insertion.

Twist & Lock™:

The fitting should be in the unlocked position, this is shown by a small gap between the screw cap and the body flange. Push the pipe fully into the fitting until it hits the pipe stop. When the piping has been securely inserted, screw the twist lock cap into the locked position. Give a firm pull to the pipe to check that it is secure. It is good practice to test the system prior to leaving site or before use.

To Disconnect:

The screw caps will need to be screwed back to an unlocked position. Push the collet square against the face of the fitting by using fingers or a collet release tool. With the collet held in this position, the pipe can be removed. The fitting can be used multiple times without replacement.

What NOT to do

Do not use hacksaws or any other tool that created burs or rough edges on the pipe, don’t use damaged or scored pipe as this can damage the O-ring.

Don’t forget to push the pipe fully into the fitting, past both the collet (teeth) and the internal O-ring.

Do not insert finger into the fitting as the stainless-steel teeth may cause injury. Always test the system under pressure to check for leaks.

 

  • Genuine John Guest® 12mm Fitting
  • 12mm Tubing insert for Hot Water Use
  • Compatible with John Guest® BPEX 12mm Tubing

 

Due to the nature of the products we sell, a strict return policy is in place. We work with food grade certified materials that must be un-opened and un-used as to be able to be re-sold.

You will receive a credit of equal amount, less the postage cost to send it to you. 

  • Wrongly purchased items may be returned for a merchandise credit, this applies for but not limited to: Wrong size, wrong system etc.
  • 30 Day return Policy: We will accept returns up to 30 days after the initial purchase, all orders should be checked immediately for damage/fault upon arrival to aid us with the return process.
  • Return shipping is to be paid by the buyer to the address provided
  • Should the item appear faulty or doesn’t work how described, the unit/item must be returned for testing (if requested), the return postage paid by the buyer. If the unit/item is deemed to be faulty, compensation will be provided for the postage cost. If the unit/item is deemed to be in working order and as described, the buyer will need to pay for return postage. 

If you have any questions about our return policy, please contact us before purchase. This will also help to ensure you purchase the correct product that suits your requirements.

More Information
Product Type No
apex-logo
jg-logo
pentak-logo
Haycarb-logo
omnipure-logo
uvg-logo
pure-lite-logo
Hydrasil-logo
Blue-logo
Molytec-logo
FSA-de-min-logo
THERMAX-logo