1. See Detail

3m John Guest® 12mm BPEX Tubing | Caravan WaterMark Hot Water 12BPEX-50C 20-11WM

SKU
GT20-11WM x3
Out of stock
A$25.00
or 4 interest-free payments of $6.25
Learn more
  • John Guest® BPEX 12mm Tubing

    The John Guest® 12mm BPEX Pipe has been specifically designed to meet Australian Standards to be compliant with WaterMark. The benefits of this product is its increased maximum working temperature and pressure compared to the standard LLDPE tubing. JG® BPEX tubing is warranted to achieve 80°C at 1000 kPa

    Manufactured in the UK by John Guest, the BPEX pipe is made of 5 layers, the centre of which is a blue coloured oxygen barrier which prevents the ingress of air into the system, reducing the effect of corrosion on metal components. Due to its low thermal conductivity, when carrying hot water, the BPEX pipe is cooler and safer to touch.

    When using BPEX pipe on hot water, tubing inserts must be used (TSM12 - GT10-131WM)

    Making a Good Connection

    Prepare the Pipe:

    Ensure the pipe end is free from score marks. Cut the pipe square using a tube cutting device. To prevent damage to the fitting, remove and burs from the end of the tubing/pipe. When using tube inserts, a twisting motion will aid the insertion.

    Twist & Lock™:

    The fitting should be in the unlocked position, this is shown by a small gap between the screw cap and the body flange. Push the pipe fully into the fitting until it hits the pipe stop. When the piping has been securely inserted, screw the twist lock cap into the locked position. Give a firm pull to the pipe to check that it is secure. It is good practice to test the system prior to leaving site or before use.

    To Disconnect:

    The screw caps will need to be screwed back to an unlocked position. Push the collet square against the face of the fitting by using fingers or a collet release tool. With the collet held in this position, the pipe can be removed. The fitting can be used multiple times without replacement.

    What NOT to do

    Do not use hacksaws or any other tool that created burs or rough edges on the pipe, don’t use damaged or scored pipe as this can damage the O-ring.

    Don’t forget to push the pipe fully into the fitting, past both the collet (teeth) and the internal O-ring.

    Do not insert finger into the fitting as the stainless-steel teeth may cause injury. Always test the system under pressure to check for leaks.

    Genuine John Guest® Product Suit 12mm Twist & Lock­­™
  • WaterMark Certified for Use on Hot Water Over 90°C
  • Warranted for 80°C @ 1000 kPa
  • Compatible with John Guest® TSM12 Tubing Inserts For Hot Water
  • Approved Component for Caravan Manufacturing
  • Sold in Lots of 3m Length - Supplied as Continuous Length

 

Return Policy

Due to the nature of the products we sell, a strict return policy is in place. We work with food grade certified materials that must be un-opened and un-used as to be able to be re-sold.

You may receive a refund or credit of equal amount, less the restocking fee if applicable and any other deductions that are relevant. 

  • Wrongly purchased items may be returned for a merchandise credit, this applies for but not limited to: Wrong size, wrong system etc.
  • 30 Day return Policy:  Returns will not be accepted without prior approval or after 30 days of invoice date.
  • All returns will incur a 17.5% restocking fee or cost to send the item to you whichever greater. FSA may use discretion to determine the restocking fee.
  • Any damages (minor, that can be repaired) will incur a fee which will be deducted from the total refund which will be equal to the cost of the replacement 
    parts (List Price) and labour charge (if applicable) to repair the system(s). This will be separate to the restocking fee.
  • Any damage considered to be major and not feasible for repair may be refused and the return request will be void. The customer will be responsible for the return freight or disposal of the damaged unit.
  • Return shipping is to be paid by the buyer to the address provided. It is recommended that the customer applies transit warranty to the return freight in case of damage.
  • Any damages to the system that were not reported to FSA within 48 business hours of receipted delivery are not covered under our transit warranty.

 

  • Should the item appear faulty or doesn’t work how described, the unit/item must be returned for testing (if requested), the return postage paid by the buyer. If the unit/item is deemed to be faulty, compensation will be provided for the postage cost (Proof of cost required). If the unit/item is deemed to be in working order and as described, the buyer will responsible for return postage. 

 

If you have any questions about our return policy, please contact us before purchase. This will also help to ensure you purchase the correct product that suits your requirements.


apex-logo
jg-logo
pentak-logo
Haycarb-logo
omnipure-logo
uvg-logo
pure-lite-logo
Hydrasil-logo
Blue-logo
Molytec-logo
FSA-de-min-logo
THERMAX-logo