High Performance Filtration | Media Vessel Pressure Tank for Water Filtration with Backwash Head Polyethylene Inner | 12" x 52" (GT1-18)

Specifications & Technical Data:

Max Pressure: 1,000 kPa/10 Bar/145 PSI
Working Pressure: ≤ 700 kPa/7 Bar/101 PSI
Temperature Range: 1-50 C (122 F)
Max Vacuum: 17kPa (5" Hg) Negative Pressure
Nominal Volume: 84 Litres
Opening: 2.5"
Inner Material: Polyethylene
Outer Material: Glass Reinforced Epoxy

WARNING - DO NOT EXCEED OPERATING SPECIFICATIONS!

Handling Instructions:

Vessel approved for water filtration use only.
All other applications must be approved by the manufacturer.
Do not use for Pneumatic or Hydro-pneumatic application.
The vessel must NOT be exposed to temperatures lower than -30 Celcius.
This Vessel complies with all requirements of P.E.D 97/23/EC Directive
This water pressure vessel is tested & Compliant to NSF/ANSI Standard 44 for Material and Structural Requirements Only.

WARNING - For correct operation of this appliance, it is essential to observe the manufacturer's instructions.

CAUTION - Do NOT use on microbiologically unsafe water without adequate disinfection.
Check your media specifications for contaminant reduction capabilities.
Do NOT use for Pneumatic or Hydro-Pneumatic applications.

INSTRUCTIONS - Do NOT use any liquid thread sealant on this device or supplied valves )if applicable).
A pressure-limiting device to 500 kPa is required for domestic POE use if the pressure exceeds 500 kPa.
Where possible, limit direct exposure to sunlight.

Return Policy

Due to the nature of the products we sell, a strict return policy is in place. We work with food grade certified materials that must be un-opened and un-used as to be able to be re-sold.

You may receive a refund or credit of equal amount, less the restocking fee if applicable and any other deductions that are relevant.

• Wrongly purchased items may be returned for a merchandise credit, this applies for but not limited to: Wrong size, wrong system etc.
• 30 Day return Policy: Returns will not be accepted without prior approval or after 30 days of invoice date.
• All returns will incur a 17.5% restocking fee or cost to send the item to you whichever greater. FSA may use discretion to determine the restocking fee.
• Any damages (minor, that can be repaired) will incur a fee which will be deducted from the total refund which will be equal to the cost of the replacement
  parts (List Price) and labour charge (if applicable) to repair the system(s). This will be separate to the restocking fee.
• Any damage considered to be major and not feasible for repair may be refused and the return request will be void. The customer will be responsible for the return freight or disposal of the damaged unit.
• Return shipping is to be paid by the buyer to the address provided. It is recommended that the customer applies transit warranty to the return freight in case of damage.
• Any damages to the system that were not reported to FSA within 48 business hours of receipted delivery are not covered under our transit warranty.

• Should the item appear faulty or doesn’t work how described, the unit/item must be returned for testing (if requested), the return postage paid by the buyer. If the unit/item is deemed to be faulty, compensation will be provided for the postage cost (Proof of cost required). If the unit/item is deemed to be in working order and as described, the buyer will responsible for return postage.

If you have any questions about our return policy, please contact us before purchase. This will also help to ensure you purchase the correct product that suits your requirements.