FREE SHIPPING AUSTRALIA WIDE
Free shipping on all retail orders
AUSTRALIAN OWNED & OPERATED
Licenced WaterMark Supplier
HPF Benchtop Water Filter System 0.5 Micron Premium Carbon Filters H1-100CTOP
- WaterMark Certified Benchtop POU Filter System
- Heavy Duty Twin O-Ring Housings
- Inbuilt Faucet Tap for Drinking Water
- Premium Chlorine Taste & Odour Filtration
- 150% Better than Standard Carbon Blocks
- High Capacity 0.5uM Nominal Filtration
- Installation Kit & Adaptors included
- Designed for Chlorinated Water
- Small 15cm Benchtop Footprint
HPF Benchtop Systems provide you and your family with clean, fresh great tasting water without the hassles of installation and expensive plumbing costs. This is non-invasive water filtration that is simple and effective to provide drinking water in your home. The benefits of the system being a POU system is that it is the last point of contact with the water so any contaminants caused by old plumbing or fixtures will be filtered out*.
The H1-0CTOP system is designed solely for mains water filtration only. It contains a Premium Chlorine Carbon filter and is perfect for permanent installation to provide your family with easy to access drinking water. The CTOP 2510-P5 cartridge is designed with high capacity and absorbency in mind and can treat 150% more chlorine than standard CTO filters on the market. As the name suggests, the CTOP range of filters is the superior premium upgrade to the standard CTO filters which allows the filter maintain full chlorine removal for families that consume high volumes of drinking water.
Premium Chlorine Taste & Odour Carbon Block
CTO Filters are a base model filter and the most common type of Carbon Block on the market. These filters have the best of both worlds with a low-pressure differential and low micron rating. The CTOP Range of Carbon Block Filters boasts a superior grade catalytic blend to achieve up to 150% higher CTO Reduction.
This carbon block is capable of removing Chlorine for up to 75,000L of water while still maintaining the highest rate for chlorine and chemical removal in its class. It is by far the best filter from the Pure range for the removal of Chlorine, VOC's along with taste and odour in water.
How to Measure Your Tap Thread Size to Check Compatibility
This system comes with a standard 22mm Female Thread / 24mm Male Thread tap diverter adaptor per the picture below:
However, sometimes consumers run into trouble when buying a benchtop water filter if they have a non-standard-sized tap (i.e. a tap that is very modern but very skinny), and it’s hard to find an adaptor to fit – so it’s definitely best to check before you buy!
To check the size of your tap, screw the aerator off the end of your tap and take a measurement of the outer diameter of the thread (similar to the below example). Please make sure to measure it accurately from the middle of the thread (see example of the red line below).
***If you are not sure whether the tap adaptor that comes with this system will fit your tap, please follow the above instructions to take a picture of your tap thread measurement, and email the picture to us at info@filtersystemsaustralia.com.au so our team can help double-check the compatibility for you!***
Dimensions mm (H/W/D): 300/150/150
Flow Rate: 3.8L/Min
Temperature: 2°C - 38°C
Pressure: 15 psi (103 kPa) - 70 psi (500 kPa)
Cartridge Size: 10" x 2.5"
Cartridge Life: 75,000L Capacity OR 12 Months
Warranty: 10 Years (Housing Failure) - Excludes Fittings, Valves & Cartridges
Return Policy
Due to the nature of the products we sell, a strict return policy is in place. We work with food grade certified materials that must be un-opened and un-used as to be able to be re-sold.
You may receive a refund or credit of equal amount, less the restocking fee if applicable and any other deductions that are relevant.
- Wrongly purchased items may be returned for a merchandise credit, this applies for but not limited to: Wrong size, wrong system etc.
- 30 Day return Policy: Returns will not be accepted without prior approval or after 30 days of invoice date.
- All returns will incur a 17.5% restocking fee or cost to send the item to you whichever greater. FSA may use discretion to determine the restocking fee.
- Any damages (minor, that can be repaired) will incur a fee which will be deducted from the total refund which will be equal to the cost of the replacement
parts (List Price) and labour charge (if applicable) to repair the system(s). This will be separate to the restocking fee. - Any damage considered to be major and not feasible for repair may be refused and the return request will be void. The customer will be responsible for the return freight or disposal of the damaged unit.
- Return shipping is to be paid by the buyer to the address provided. It is recommended that the customer applies transit warranty to the return freight in case of damage.
- Any damages to the system that were not reported to FSA within 48 business hours of receipted delivery are not covered under our transit warranty.
- Should the item appear faulty or doesn’t work how described, the unit/item must be returned for testing (if requested), the return postage paid by the buyer. If the unit/item is deemed to be faulty, compensation will be provided for the postage cost (Proof of cost required). If the unit/item is deemed to be in working order and as described, the buyer will responsible for return postage.
If you have any questions about our return policy, please contact us before purchase. This will also help to ensure you purchase the correct product that suits your requirements.