HydroSil-ULTRA 20Lt Bottle | Silver Stabilised Hydrogen Peroxide Water Sanitiser 7.5%

HydroSil ULTRA SAFETY DATA SHEET

Supplier Name: Natural Environmental Solutions PTY LTD

Address: 20 Central Park Ave, Ashmore, QLD, AUSTRALIA, 4214

Telephone: 0413 039 229

Emergency Email: info@naturalenviro.co

Synonym(s): HydroSil Ultra

Use(s) SDS: DISINFECTANT • WATER TREATMENT

Date: 18 August 2016

RISK PHRASES

R36/38

SAFETY PHRASES

S1/2

S17

S26

S36/37/39

S45

Irritating to eyes and skin.

Keep locked up and out of reach of children.

Keep away from combustible material.

In case of contact with eyes, rinse immediately with plenty of water and

seek medical advice

Wear suitable protective clothing, gloves and eye/face protection.

In case of accident or if you feel unwell seek medical advice

immediately (show the label where possible).

1. IDENTIFICATION OF THE MATERIAL AND SUPPLIER

2. HAZARDS IDENTIFICATION

CLASSIFIED AS HAZARDOUS ACCORDING TO SAFE WORK AUSTRALIA CRITERIA

3. COMPOSITION/ INFORMATION ON INGREDIENTS

NOT CLASSIFIED AS A DANGEROUS GOOD BY THE CRITERIA OF THE ADG CODE

UN No.

Packing

Group

None

Allocated

None

Allocated

DG Class

Hazchem

Code

None

Allocated

None

Allocated

Subsidiary

Risk(s)

None

Allocated

Ingredient Formula CAS No. Content

HYDROGEN PEROXIDE H2-O2 7722-84-1 1.5-7.9%

SILVER NITRATE N-O3.Ag 7761-88-8 <0.1%

WATER H2O 7732-18-5 98.4-92.0%

1

HydroSil

ULTRA

SAFETY DATA SHEET

Eye

Inhalation

Skin

Ingestion

Advice to Doctor

First Aid Facilities

If in eyes, hold eyelids apart and flush continuously with running

water. Continue flushing until advised to stop by a Poisons

Information Centre, a doctor, or for at least 15 minutes.

If inhaled, remove from contaminated area. Apply artificial respiration

if not breathing.

If skin or hair contact occurs, remove contaminated clothing and

flush skin and hair with running water.

For advice, contact a Poison Information Centre on 13 11 26

(Australia Wide) or a doctor (at once). If swallowed, do not induce

vomiting.

Treat symptomatically.

Eye wash facilities should be available.

Flammability

Fire and Explosion

Extinguishing

Hazchem Code

Oxidising agent - supports combustion. May evolve toxic gases

when heated to decomposition. May ignite in contact with

incompatible materials.

Evacuate area and contact emergency services. Toxic gases may be

evolved in a fire situation. Remain upwind and notify those downwind

of hazard. Wear full protective equipment including Self Contained

Breathing Apparatus (SCBA) when combating fire. Use waterfog to

cool intact containers and nearby storage areas.

Prevent contamination of drains or waterways.

None Allocated.

Spillage Use personal protective equipment. Contain spillage, then cover /

absorb spill with non-combustible absorbent material (vermiculite,

sand, or similar), collect and place in suitable containers for disposal.

CAUTION: Spill site may be slippery.

Storage

Handling

Store in a cool, dry, well ventilated area, preferably outdoor or

detached, removed from direct sunlight, reducing agents, acids,

alkalis, combustible materials and foodstuffs. Ensure containers are

adequately labelled, protected from physical damage and sealed

when not in use. Check regularly for leaks or spills.

Before use carefully read the product label. Use of safe work practices

are recommended to avoid eye or skin contact and inhalation. Observe

good personal hygiene, including washing hands before eating.

Prohibit eating, drinking and smoking in contaminated areas.

4. FIRST AID MEASURES

5. FIRE FIGHTING MEASURES

6. ACCIDENTAL RELEASE MEASURES

7. STORAGE AND HANDLING

2

HydroSil

ULTRA

SAFETY DATA SHEET

8. EXPOSURE CONTROLS/ PERSONAL PROTECTION

Exposure Stds

9. PHYSICAL AND CHEMICAL PROPERTIES

10. STABILITY AND REACTIVITY

Ingredient Reference TWA STEL

Hydrogen peroxide SWA (AUS) 1 ppm 1.4 mg/m³ -- --

Silver, soluble compounds (as Ag) SWA (AUS) -- 0.01 mg/m³ -- --

Biological Limits

Engineering Controls

PPE

No Biological Limit Value allocated.

Avoid inhalation. Use in well ventilated areas. Where an inhalation risk

exists, mechanical extraction ventilation is recommended. Maintain

vapour levels below the recommended exposure standard.

Wear splash-proof goggles, PVC or rubber gloves and safety glasses.

When using large quantities or where heavy contamination is likely,

wear: coveralls.

Chemical Stability

Conditions to Avoid

Material to Avoid

Hazardous

Decomposition

Products

Hazardous Reactions

Stable under recommended conditions of storage.

Avoid heat, sparks, open flames and other ignition sources.

Oxidising agent. Incompatible with combustible materials, reducing

agents (eg. amines), acids (eg. nitric acid), alkalis (eg. hydroxides),

metals, heat and ignition sources.

May evolve toxic gases when heated to decomposition.

Polymerization is not expected to occur.

Appearance

Odour

pH

Vapour Pressure

Vapour Density

Boiling Point

Melting Point

Evaporation Rate

Autoignition

Temperature

Partition

Coefficient

CLEAR COLOURLESS

LIQUID (5L, 10L AND 25L

CONTAINERS)

ODOURLESS

6.8 to 7.0

18 mm Hg @ 20°C

NOT AVAILABLE

100°C

NOT AVAILABLE

AS FOR WATER

NOT AVAILABLE

NOT AVAILABLE

Solubility (water)

Specific Gravity

% Volatiles

Flammability

Flash Point

Upper Explosion Limit

Lower Explosion Limit

Decomposition

Temperature

Viscosity

SOLUBLE

1 (Approximately)

> 60 % (Water)

NON FLAMMABLE

NOT RELEVANT

NOT RELEVANT

NOT RELEVANT

NOT AVAILABLE

NOT AVAILABLE

3

HydroSil

ULTRA

SAFETY DATA SHEET

11. TOXICOLOGICAL INFORMATION

12. ECOLOGICAL INFORMATION

13. DISPOSAL CONSIDERATIONS

Health Hazard

Summary

Eye

Inhalation

Skin

Ingestion

Toxicity Data

Low to moderate toxicity - irritant. This product has the potential to

cause adverse health effects with over exposure. Upon dilution, the

potential for adverse health effects may be reduced.

Irritant. Contact may result in irritation, lacrimation, pain, redness and

conjunctivitis. May result in burns with prolonged contact.

Irritant. Over exposure to vapours may result in respiratory irritation,

nausea, dizziness and headache. Low vapour pressure may reduce

the likelihood of inhalation.

Irritant. Contact may result in irritation, redness, pain and rash.

Low to moderate toxicity. Ingestion may result in gastrointestinal

irritation, nausea, vomiting, abdominal pain and diarrhoea.

HYDROGEN PEROXIDE (7722-84-1)

LC50 (Inhalation): 2000 mg/m³/4 hours (rat) LCLo (Inhalation): 227

ppm (mouse)

LD50 (Ingestion): 2000 mg/kg (mouse) LD50 (Intraperitoneal): 880

mg/kg (mouse) LD50 (Intravenous): 15000 mg/kg (rabbit) LD50 (Skin):

1200 mg/kg (mouse)

LD50 (Subcutaneous): 620 mg/kg (rat) LDLo (Skin): 620 500 mg/kg

(rabbit)

SILVER NITRATE (7761-88-8)

LD50 (Ingestion): 50 mg/kg (mouse) LD50 (Intraperitoneal): 17 mg/kg

(mouse) LDLo (Ingestion): 800 mg/kg (rat)

LDLo (Intraperitoneal): 216 mg/kg (guinea pig) LDLo (Intravenous):

8800 ug/kg (rabbit)

LDLo (Subcutaneous): 62 mg/kg (guinea pig)

Environment

Ecotoxicity

Persistence /

Degradability

Mobility

Limited ecotoxicity data was available for this product at the time

this report was prepared. Ensure appropriate measures are taken to

prevent this product from entering the environment.

Toxic to aquatic organisms.

This product is readily biodegradable.

Miscible in water, and likely to be transported considerable distances

in soil.

Waste Disposal

Legislation

Reuse where possible. Alternatively, absorb with sand or similar and

dispose of to an approved landfill site.

Contact the manufacturer for additional information.

Dispose of in accordance with relevant local legislation.

4

HydroSil

ULTRA

SAFETY DATA SHEET

14. TRANSPORT INFORMATION

NOT CLASSIFIED AS A DANGEROUS GOOD BY THE CRITERIA OF THE ADG CODE

15. REGULATORY INFORMATION

16. OTHER INFORMATION

Poison Schedule

AICS

Classified as a Schedule 5 (S5) Poison using the criteria in the

Standard for the Uniform Scheduling of Drugs and Poisons (SUSDP).

All chemicals listed on the Australian Inventory of Chemical

Substances (AICS).

Additional

Information

WORKPLACE CONTROLS AND PRACTICES: Unless a less

toxic chemical can be substituted for a hazardous substance,

ENGINEERING CONTROLS are the most effective way of reducing

exposure. The best protection is to enclose operations and/or

provide local exhaust ventilation at the site of chemical release.

Isolating operations can also reduce exposure. Using respirators or

protective equipment is less effective than the controls mentioned

above, but is sometimes necessary.

ABBREVIATIONS:

ACGIH - American Conference of Industrial Hygienists. ADG -

Australian Dangerous Goods.

BEI - Biological Exposure Indice(s).

CAS# - Chemical Abstract Service number - used to uniquely identify

chemical compounds. CNS - Central Nervous System.

EC No - European Community Number.

HSNO - Hazardous Substances and New Organisms. IARC -

International Agency for Research on Cancer. mg/m³ - Milligrams per

Cubic Metre.

NOS - Not Otherwise Specified.

pH - relates to hydrogen ion concentration using a scale of 0 (high

acidic) to 14 (highly alkaline). ppm - Parts Per Million.

RTECS - Registry of Toxic Effects of Chemical Substances. STEL -

Short Term Exposure Limit.

SWA - Safe Work Australia. TWA - Time Weighted Average.

Shipping

Name

UN No.

Packing

Group

None

Allocated

None

Allocated

None

Allocated

DG Class

Hazchem

Code

None

Allocated

None

Allocated

Subsidiary

Risk(s)

None

Allocated

5

HydroSil ULTRA

SAFETY DATA SHEET

16. OTHER INFORMATION continued

Additional Information

HEALTH EFFECTS FROM EXPOSURE:

It should be noted that the effects from exposure to this product

will depend on several factors including: frequency and duration of

use; quantity used; effectiveness of control measures; protective

equipment used and method of application. Given that it is

impractical to prepare a ChemAlert report which would encompass

all possible scenarios, it is anticipated that users will assess the risks

and apply control methods where appropriate.

Report Status This document has been compiled by RMT on behalf of the

manufacturer of the product and serves as the manufacturer’s Safety

Data Sheet (‘SDS’).

It is based on information concerning the product which has been

provided to RMT by the manufacturer or obtained from third party

sources and is believed to represent the current state of knowledge

as to the appropriate safety and handling precautions for the product

at the time of issue. Further clarification regarding any aspect of the

product should be obtained directly from the manufacturer.

While RMT has taken all due care to include accurate and up-todate

information in this SDS, it does not provide any warranty as to

accuracy or completeness. As far as lawfully possible, RMT accepts

no liability for any loss, injury or damage (including consequential

loss) which may be suffered or incurred by any person as a

consequence of their reliance on the information contained in this

SDS.

Prepared By Risk Management Technologies

5 Ventnor Ave, West Perth Western Australia 6005

Phone: +61 8 9322 1711

Fax: +61 8 9322 1794

Email: info@rmt.com.au Web: www.rmt.com.au

SDS Date 26 Sep 2011

End of Report

Return Policy

Due to the nature of the products we sell, a strict return policy is in place. We work with food grade certified materials that must be un-opened and un-used as to be able to be re-sold.

You may receive a refund or credit of equal amount, less the restocking fee if applicable and any other deductions that are relevant. 

• Wrongly purchased items may be returned for a merchandise credit, this applies for but not limited to: Wrong size, wrong system etc.
• 30 Day return Policy:  Returns will not be accepted without prior approval or after 30 days of invoice date.
• All returns will incur a 17.5% restocking fee or cost to send the item to you whichever greater. FSA may use discretion to determine the restocking fee.
• Any damages (minor, that can be repaired) will incur a fee which will be deducted from the total refund which will be equal to the cost of the replacement 
  parts (List Price) and labour charge (if applicable) to repair the system(s). This will be separate to the restocking fee.
• Any damage considered to be major and not feasible for repair may be refused and the return request will be void. The customer will be responsible for the return freight or disposal of the damaged unit.
• Return shipping is to be paid by the buyer to the address provided. It is recommended that the customer applies transit warranty to the return freight in case of damage.
• Any damages to the system that were not reported to FSA within 48 business hours of receipted delivery are not covered under our transit warranty.

• Should the item appear faulty or doesn’t work how described, the unit/item must be returned for testing (if requested), the return postage paid by the buyer. If the unit/item is deemed to be faulty, compensation will be provided for the postage cost (Proof of cost required). If the unit/item is deemed to be in working order and as described, the buyer will responsible for return postage. 

If you have any questions about our return policy, please contact us before purchase. This will also help to ensure you purchase the correct product that suits your requirements.