Single Undersink 0.1 Micron Sediment, Carbon + Bacteria Reduction Water Filter System with Faucet Kit (GT1-15MAF)
- Ideal Undersink Solution for Tank/Rain/Potable Bore Water*
- Recommended for Caravans, Camper Vans and Motorhomes
- Filtration to 0.1 Micron Helps Protect Against Paracytic Cysts and Reduce Bacteria
- Compact Design Perfect for Small Undersink Spaces
Single Undersink 0.1 Micron Sediment, Carbon + Bacteria Reduction Water Filter System with Faucet Kit (GT1-15MAF)
- Australian Standard Approved Housing (AS3497)
- Caware 0.1 Micron 3-in-1 Sediment, Chemical + Bacteria Reduction Filter
- Chrome Bat Handle Faucet
- Watermark Approved Pressure Limiting Valve
- All fittings & components for DIY installation
- Comprehensive Instruction Manual
Specs & Dimensions
- Height: 355mm
- Width: 120mm
- Depth: 120mm
- Size: 10" x 2.5"
- Ports: 1/4" NPT Female
- Flow: Approx 10Lt/Min when using standard cartridges.
- Tested To: 150 psi/1034 kPa - we deem 70 psi/482 kPa to be optimal.
About the Caware 0.1 Micron 3-in-1 Sediment, Chemical & Bacteria Reduction Filter Cartridge | 10" x 2.5" | (42-0-MAF)
- 0.1 Absolute Micron Filters Sediment, Chemical + Bacteria
- Sediment & Turbidity Reduction with 5-10 Micron Pleated Membrane
- Chemical Reduction with 5 Micron Premium Coconut Carbon Block
- Bacterial Reduction with 0.1 Micron Hollow Fibre Membrane
- Rapid Gravity Flow Handles Low Pressure @ 4 Litres Per Minute
- Independently Lab Tested For Log8 Reduction of E.Coli & P.Aeruginosa Bacteria
- Compliant to National Sanitation Foundation/ANSI Standard No. 42 & 53, FDA and EU Food Grade Requirements
- Operating Pressure: 10-120psi (0.7-.2 bar)
- Operating Temperature: 2-38°C (Cold Water Application Only)
- Operating Flow Rate: 4 Litres Per Minute
- Lifespan: 6000L @ 80% Chlorine Reduction and 12000L @ 50% Chlorine Reduction.
This cartridge is ideal for tank water applications, filtering out sediment and silt, followed by chemical reduction down to 5 microns using a 100% Coconut Carbon Block to reduce chlorine, volatile organic chemicals, pesticides and hazardous chemicals, and finishing with a 0.1-micron filtration to protect against bacteria, viruses and parasitic cysts like Giardia & Cryptosporidium. Enjoy the sweet, mild taste of water as it should be!
INSTALLATION - Please note this system is WaterMark Certified to Australian plumbing standards (AS/NZS 3497), and will need to be installed by a licensed plumber. Simply order online with free shipping to your home, and once it arrives any local licensed plumber will be able to do the installation (the system also comes with instructions)!
IMPORTANT INFORMATION ABOUT WATER SANITATION
Disclaimer: Do not use or drink microbiologically unsafe water or water of unknown quality without adequate disinfection.
FSA’s Recommendation for Rain/Tank/Potable Bore Water*
If you use Rain/Tank Water and Potable Bore Water (*i.e bore water has been tested to the Australian Drinking Water Guidelines and deemed suitable for drinking purposes per the Guidelines’ aesthetic, health and safety recommendations), please see below our recommended filtration schedule to ensure safe drinking water:
- Tank Dose with HydroSil Ultra 7.5% for Protection Against Bacteria & Viruses
- Undersink <1 Micron Absolute Filter for Protection against Parasites & (Optional) Coconut Carbon for Improved Final Taste & Odour
Read on for a full explanation of why we recommend this as the minimum standard of filtration for treating Rain/Tank/Potable Bore Water for drinking.
For Protection Against Bacteria/Viruses
Bacteria (such as E.Coli) can colonize in the stagnant water and result in harmful illnesses when consumed.
For sanitation against common water-borne bacteria/viruses in rainwater and potable bore water*, we, therefore, recommend dosing your tank with a product such as Hydrosil Ultra 7.5% Water Sanitiser to ensure protection against microbiological contamination/biofouling in your pipework and/or filter system.
HydroSil is a food-grade silver-activated, hydrogen-peroxide based water sanitiser, which acts to oxidise bacteria and viruses, without leaving any dangerous residues behind. HydroSil sanitizes and protects your tanks and water storage devices, making rainwater and potable bore water safe and suitable for human consumption. HydroSil is not a chlorine-based chemical like most sterilisers on the market today. It is non-toxic, and safe to use around your home and family.
Dosage Rate: HydroSil should be dosed at a rate of 200mL per 1000L of water. To scale down to tank size, you will require 20mL per 100L.
Buy Hydrosil Ultra 7.5% Here:
For Protection Against Parasites/Protozoa
Ingesting waterborne parasites (Protozoan Cysts) such as Cryptosporidium and Giardia (which flourish in raw water sources such as rain water tanks and bores), are a common cause of gastroenteritis.
Whilst Chlorine can inactivate Giardia with a moderate dose and contact time, Chlorine has a negligible effect on Cryptosporidium unless dosed in excess of the acceptable Chlorine limit per the Australian Drinking Water Guidelines (Version 3.6, pp. 200).
For protection against these common cysts, we, therefore, recommend under sink filtration down to at least 1 Micron (Absolute) or smaller (i.e. with Reverse Osmosis or the Caware 0.1 Micron Absolute 3-in-1 Sediment, Chemical + Bacteria Reduction Filter).
Such fine filtration, used along with regular sanitation (i.e. with HydroSil Ultra 7.5%) is a cost-effective and safe drinking water solution for rain water and potable bore water*, and is perfect for casual disinfection requirements such as when travelling in a caravan.
Due to the nature of the products we sell, a strict return policy is in place. We work with food grade certified materials that must be un-opened and un-used as to be able to be re-sold.
You may receive a refund or credit of equal amount, less the restocking fee if applicable and any other deductions that are relevant.
- Wrongly purchased items may be returned for a merchandise credit, this applies for but not limited to: Wrong size, wrong system etc.
- 30 Day return Policy: Returns will not be accepted without prior approval or after 30 days of invoice date.
- All returns will incur a 17.5% restocking fee or cost to send the item to you whichever greater. FSA may use discretion to determine the restocking fee.
- Any damages (minor, that can be repaired) will incur a fee which will be deducted from the total refund which will be equal to the cost of the replacement
parts (List Price) and labour charge (if applicable) to repair the system(s). This will be separate to the restocking fee.
- Any damage considered to be major and not feasible for repair may be refused and the return request will be void. The customer will be responsible for the return freight or disposal of the damaged unit.
- Return shipping is to be paid by the buyer to the address provided. It is recommended that the customer applies transit warranty to the return freight in case of damage.
- Any damages to the system that were not reported to FSA within 48 business hours of receipted delivery are not covered under our transit warranty.
- Should the item appear faulty or doesn’t work how described, the unit/item must be returned for testing (if requested), the return postage paid by the buyer. If the unit/item is deemed to be faulty, compensation will be provided for the postage cost (Proof of cost required). If the unit/item is deemed to be in working order and as described, the buyer will responsible for return postage.
If you have any questions about our return policy, please contact us before purchase. This will also help to ensure you purchase the correct product that suits your requirements.
Can I install my Water Filter on my own or do I need a Plumber?
For quality assurance and Insurance reasons, we always recommend using a licenced plumber who is familiar with water filtration. This ensures that the installation runs smoothly and is professional. If you fancy yourself reasonable at DIY type projects, we provide you with all the necessary components and instructions you need to conduct the installation yourself. Our technical support team are contactable during business hours on 1300 888 008 should you have any queries about installation.
Will Undersink Water Filters Remove Fluoride?
Standard Undersink filters will not remove fluoride from the water, we recommend using reverse osmosis as it is the safest, and most effective way of removing Fluoride from the water. There are proclaimed Fluoride Removal Cartridges on the market however they use a material called Activated Alumina which will remove Fluoride up to approx. 80% while the filter is new, but will then rapidly depreciate to the point where it is no longer effective. The other down side to the Activated Alumina cartridges is, they have a tendency to leach heavy metals into the water when the filter ages. If you do not keep a strict routine for filter replacement, it may be introducing dangerous heavy metals into your drinking water.
What are Undersink filters for?
There are a few different models of Undersink filter that each have their own specific purpose. The most common model of Undersink filter you will come across is a Sediment + Coconut Carbon configuration. As the name suggests, they have a dual action, the first filter will remove dirt/particles and sediment, while the Coconut Carbon filter absorbs chemicals from the water such as Chlorine.
Some systems elect to use a Dual Coconut Carbon Set up to double the contact time with the water. As we know that carbon efficiency is majorly to do with Contact Time adding more carbon to a system can greatly increase its ability to remove hazardous chemicals, Tannins, Tastes and odours.
Can an Undersink Water Filter remove Chloramine?
Chloramine Injection has recently been introduced into many council regions over Australia, including on the Gold Coast where FSA is based. Chloramine presents a number of issues in regards to drinking water including but not limited to; dissolving of heavy metals such as lead into the water, release of ammonia gas and adverse skin reactions. As previously mentioned, the more carbon the better. Chloramine is very hard to remove by normal means and it is removed in 2 staged. The first carbon filter acts to break open the Chloramine which in turn, releases the other various residual gasses into the water, the second carbon can then easily extract and absorb all remaining residuals, effectively removing the dangerous Chloramine from your drinking water.
How often should I change the filter cartridges?
Undersink Water Filter Cartridges should be changed anywhere between 6-12 months. You will usually notice a distinct change in taste of the water if you have the filters in too long. This signifies that the Coconut Carbon Cartridge is no longer working to its full capacity and is beginning to allow residual amounts of chemicals through into your drinking water. As a rule, you should not leave your filters in for longer than 12 months regardless if you are on town OR rain water.
What is filter protection equipment, and do I need to use it?
Filter Protection Equipment is an important part of water filtration. Our products are sourced from experienced and reliable manufacturers and also carry the highest level of certification in the water filtration industry. Regardless of Brand, Make, Model or Country of manufacture, water filtration will ALWAYS be the weakest point in your plumbing. The three main causes of water filtration failure are; Overnight pressure surges, Intense Water Hammer Pressure Impacts, and thermal expansion. All of which can be addressed and prevented with a few simple pieces of equipment. A Pressure Limiting Valve is used to buffer the incoming pressure to the Australian Regulation Pressure of 500kPA. This is the minimum requirement for most insurance and warranty validation and is essential when used on Town mains / municipal water. A Water Hammer Arrestor is a copper tube looking device which is commonly found in the laundry (If you have one). It acts to absorb and dissipate pressure spikes in your water lines. Pressure spikes occur from appliances such as the washing machine or dishwasher and can magnify the water pressure tenfold which can cause serious damage to water filtration components. Water hammer gets the name by the distinct sound you hear when the shockwaves rattle loose copper pipes or worn out valves. This is something that is essential to be addressed immediately before installing water filtration. A Pressure Relief Valve is as it sounds. It is pre-set to open once the pressure reaches 110PSI, shooting that pressure/water down the drain line and easing the pressure in your water filter. This is a requirement if you intend to hook up your water filter to a fridge, chiller or ice maker. They are also a good idea to help relieve residual pressure from pressure surges (even if you have a PLV + water hammer arrestor).