Ultraviolet Water Sterilisation System 3.8 L/min | Suit Undersink (7-2K)

Product Code: GT7-2K

Availability: In Stock Ships In 1 Day!

Availability: In stock

$295.00
 
$295.00
 


Description

Full Australian WaterMark Certification

This Water Filtration System is certified to WaterMark Standards AS/NZS 3497 Under the Certificate number 23247. WaterMark is the standard that is required by law for a qualified plumber in Australia to install any item on municipal town water. All products used under this certification will give you peace of mind knowing that your water filter complies with Australian plumbing codes. Our WaterMark filtration systems are hand assembled here in Australia and are batch tested to ensure quality and workmanship for your filtration products.

Ultraviolet Sanitation

UV Water Sanitation is by far the most important filtration process when it comes to rain water treatment. Rain water harbours bacteria of all types but is some cases much more harmful bacteria may be present in the tank. E-Coli is a common bacterium in tank water and is due mostly to Frogs in and around your tanks/catchment. Ultraviolet sanitation works by breaking down the cell wall of a micro-organism allowing oxidation to occur which in turn prevents the bacteria from multiplying until it is finally eradicated. Ultraviolet filtration is a chemical free solution to water sanitation creating no by products in the water.

Kit Contains

  • GT7-2K                WaterMark Undersink UV System 14W | 1/4” Ports
  •                             1 Pair of Plastic Mounting Clamps
  • GT7-2K-Lamp      282mm 4 Pin 14W UV Lamp
  • GT7-2K-Thimble  331mm Quartz Thimble 23mm*OD
  • GT7-8K-PS           UL Certified Ballast 10-40W Australian Plug + Earth Cable
  • GT7-2NSF-OR      NSF/ANSI 42 Compliant O-Rings Suit 23mm*OD

Features

  • Commercial Grade Electropolished 304 Stainless Steel Chamber
  • Visual & Audible Lamp Failure Alarm
  • 1/4” BSP Threaded Female Connections
  • Strong Plastic Mounting Clamps – Suitable for Mounting On U/Sink Housings
  • High Intensity UV Lamps – Up to 3.8L/min @ 30mJ/cm²

Water Pre-Treatment Specifications

  • Hardness               < 120 mg/L
  • Turbidity                < 1.0 NTU
  • Iron                       < 0.3 mg/L
  • Manganese             < 0.05 mg/L
  • Tannins                  < 0.1 mg/L
  • Filtration               < 5uM Particulate Filtration

Specs/Performance

Max Flow                    3.8L/Min (For 30mJ/cm² EOL)
Voltage                      230-240V
Chamber                    304 SS
Ports Size                   1/4” BSP (Female)
Max Pressure              125 psi
Working Pressure        Up To 70psi
UV Lamp                    GT7-2K-Lamp
Lamp Power               14W
Lamp Length               282mm
Thimble Length           331mm
Thimble OD                23mm
Thimble                     GT7-2K-Thimble
Ballast                       GT7-8K-PS

Dimensions

Length                           340mm (Without Plug)
Between Ports               230mm

Earthing: Before operating this unit, it must be earthed. Simply attach the supplied earthing cable connected to the chamber to an earthing rod.

Technical Data

UV systems are not designed to be turned on and off. Doing this may shorten your lamp life. Lamps should be changed every year. The lamp may still be working, but after 1 year, the power may not be able to kill all bacteria. The Quartz thimble should be replaced every 2 years. If hardness is high it is recommended to service and clean the UV thimble every 6 months or as required to remove and scale that may build up.

Dosage – GT7-2K

General Disinfection (Common)                 30 mJ/cm²
Flow Rate Maximum                                   3.8 L/min

Recommended for Drinking Water             40 mJ/cm²
Flow Rate Maximum                                  3 L/min

Returns

Due to the nature of the products we sell, a strict return policy is in place. We work with food grade certified materials that must be un-opened and un-used as to be able to be re-sold.

You will receive a credit of equal amount, less the postage cost to send it to you. 

  • Wrongly purchased items may be returned for a merchandise credit, this applies for but not limited to: Wrong size, wrong system etc.
  • 30 Day return Policy: We will accept returns up to 30 days after the initial purchase, all orders should be checked immediately for damage/fault upon arrival to aid us with the return process.
  • Return shipping is to be paid by the buyer to the address provided
  • Should the item appear faulty or doesn’t work how described, the unit/item must be returned for testing (if requested), the return postage paid by the buyer. If the unit/item is deemed to be faulty, compensation will be provided for the postage cost. If the unit/item is deemed to be in working order and as described, the buyer will need to pay for return postage. 

If you have any questions about our return policy, please contact us before purchase. This will also help to ensure you purchase the correct product that suits your requirements.

FAQ

Additional Information

Product CodeGT7-2K
Product TypeNo
Installation / InstructionClick view to Installation instruction

Community Q&A

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

apex-logo.png
jg-logo.png
pentak-logo.png
Haycarb-logo.png
omnipure-logo.png
uvg-logo.png
pure-lite-logo.png
Hydrasil-logo.png
Blue-logo.png
Molytec-logo.png
FSA-de-min-logo.png
THERMAX-logo.png