Ultraviolet Water Sterilisation System 50L/m All Of House UV 316 Stainless

Product Code: GT7-8K

Availability: In Stock Ships In 1 Day!

Availability: In stock

$640.00
 
$640.00
 


Description

U/V System - 50 Ltr/min. Suits All of House Use

COMMERCIAL GRADE - 316 STAINLESS STEEL

The ultraviolet germicidal system has become an exceptionally popular water disinfection alternative. Modern technology is incorporated to create the most natural purification.

Ultraviolet lamps produce germicidal short wave radiation, which eradicates bacteria, viruses and other kinds of microbiological contamination present in all water supplies.

Suitable for ALL OF HOUSE use.

Features Include:

* Commercial Grade Stainless Steel: 316 construction

* Fitted with visual and audible Lamp Fail Alarms

* BSP threaded connections on same side.

* Easy to install brackets

* Efficient, high intensity, low pressure UV lamps

* Lamps parallel to water flow

Specs:

Flow: 50 lpm

Systems Dimensions: Length without plug 900mm (780mm between ports)

Thimble: Quarts Dome type Thimble

Port: 1” (25mm) Male BSP

Lamp Power: 40 watt

Warranty: 12 months

No micro-organism is known to be immune to UV. Heavy duty UV lamps and quartz thimble

using highest grade “hard glass” pure fused quartz to allow highest output.

The ultraviolet germicidal system has become an exceptionally popular water disinfection

alternative.

Modern technology is incorporated to create the most natural purification. Ultraviolet lamps

produce germicidal short wave radiation, which eradicates bacteria, viruses and other kinds of

microbiological contamination present in all water supplies.

These are recommended levels, for use as a guideline for pre-treatment requirements:

Hardness: <120ppm

Turbidity: <1.0NTU

Iron: <0.3ppm

Manganese: <0.05ppm

Tannins: <0.1ppm

These are recommended levels, for use as a guideline for pre-treatment requirements:

Hardness: Turbidity: Iron: Manganese: Tannins:
If your water quality parameters do not meet these criteria, please contact the distributor for pre-treatment recommendations.

Required:

Pre-treatment must include at least a 5 micron sediment filter installed prior to the unit in order to ensure that particles capable of shielding pathogens are removed from the water prior to entering the system.

The vessel is rated to 1000Kpa. The unit must be installed with an Australian Standards Approved Pressure Limiting Valve.

A shut off valve must be installed prior to the unit in order to turn the water off for servicing and to ensure the flow is restricted to the parameters of the unit.

Ensure adequate clearance at the lamp connection end of the unit in order to safely remove the lamp from the chamber for servicing and lamp replacement.

Space required is at least the length of the UV chamber.

EARTHING:

Before operating this unit, it must be earthed. Simply attach the supplied earthing cable connected to the chamber to an earthing rod.

TECHNICAL DATA:

UV systems are not designed to be turned on and off. Doing this will shorten your lamp life. Lamps should be changed every year. The lamp may still be working, but after 1 year, the power will not be guaranteed to kill bacteria. The unit should be cleaned regularly. Hardness and other particles can build up on the quartz sleeve and on the inside of the UV chamber. 9000 hours (1 year) lamp life Working Pressure 100PSI

Please note, ballast supplied is not waterproof - see instruction manual

Specs/Performance

Returns

Due to the nature of the products we sell, a strict return policy is in place. We work with food grade certified materials that must be un-opened and un-used as to be able to be re-sold.

You will receive a credit of equal amount, less the postage cost to send it to you. 

  • Wrongly purchased items may be returned for a merchandise credit, this applies for but not limited to: Wrong size, wrong system etc.
  • 30 Day return Policy: We will accept returns up to 30 days after the initial purchase, all orders should be checked immediately for damage/fault upon arrival to aid us with the return process.
  • Return shipping is to be paid by the buyer to the address provided
  • Should the item appear faulty or doesn’t work how described, the unit/item must be returned for testing (if requested), the return postage paid by the buyer. If the unit/item is deemed to be faulty, compensation will be provided for the postage cost. If the unit/item is deemed to be in working order and as described, the buyer will need to pay for return postage. 

If you have any questions about our return policy, please contact us before purchase. This will also help to ensure you purchase the correct product that suits your requirements.

FAQ

Additional Information

Product CodeGT7-8K
Product TypeWater Filters

Community Q&A

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

apex-logo.png
jg-logo.png
pentak-logo.png
Haycarb-logo.png
omnipure-logo.png
uvg-logo.png
pure-lite-logo.png
Hydrasil-logo.png
Blue-logo.png
Molytec-logo.png
FSA-de-min-logo.png
THERMAX-logo.png