You have no items in your shopping cart.
Life Time Warranty
AUSTRALIAN STANDARD APPROVED
WATERMARK APPROVED HOUSINGS
Note: DO NOT be fooled into purchasing filter kits on ebay promising they are A.S Approved or Watermarked, Ask the seller to send you the A.S.A papers PRIOR to Buying to ensure you are getting what you pay for.
We include all fittings required to DIY your own installation. We also included a very Comprehensive instruction booklet, and "Professional" after sales assistance.
Don't let the low price of this system lead you to believe that it is anything less than the highest of quality. This is the same kits purchased by plumbers, water filtration outlets and chain stores nationwide. Buy direct and SAVE.
Complete System is AS3497 - AUS Standards Approved
All Items Included With This System:
Twin Water Filter System with 1/4" Ports (Watermark Certified Housings)
2x 0.5 micron Sediment Filter
2x 1 micron 100% Coconut Carbon Block Filter
1x Opening Spanner
1x NSF 61 Certified Entry Tee
2 mtrs 1/4" Tubing (white)
1x NSF 61 Approved Faucet Tap
2x Quick Connect Tube Fittings
Generic Packing Box
1x Roll Thread Tape
1x Pressure Limiting Valve Watermarked
The cartridges in this system are standard 10" x 2.5" available through our store or from most hardware stores throughout Australia
Complete system comes new in box, with 2x quality 0.5 Micron Sediment pre-filter and 2x 1 micron top of the range 100% Coconut Carbon block filter for total reduction of chlorine taste and odor issues.
To ensure that you protect your equipment from pressure spikes we recommend replacing the PLV every 2 years as a precautionary measure Approx cost $27.00. Available through our ebay store or at leading hardware stores.
Due to the nature of the products we sell, a strict return policy is in place. We work with food grade certified materials that must be un-opened and un-used as to be able to be re-sold.
You will receive a credit of equal amount, less the postage cost to send it to you.
If you have any questions about our return policy, please contact us before purchase. This will also help to ensure you purchase the correct product that suits your requirements.
Can I install my Water Filter on my own or do I need a Plumber?
For quality assurance and Insurance reasons, we always recommend using a licenced plumber who is familiar with water filtration. This ensures that the installation runs smoothly and is professional. If you fancy yourself reasonable at DIY type projects, we provide you with all the necessary components and instructions you need to conduct the installation yourself. Our technical support team are contactable during business hours on 1300 888 008 should you have any queries about installation.
Will Undersink Water Filters Remove Fluoride?
Standard Undersink filters will not remove fluoride from the water, we recommend using reverse osmosis as it is the safest, and most effective way of removing Fluoride from the water. There are proclaimed Fluoride Removal Cartridges on the market however they use a material called Activated Alumina which will remove Fluoride up to approx. 80% while the filter is new, but will then rapidly depreciate to the point where it is no longer effective. The other down side to the Activated Alumina cartridges is, they have a tendency to leach heavy metals into the water when the filter ages. If you do not keep a strict routine for filter replacement, it may be introducing dangerous heavy metals into your drinking water.
What are Undersink filters for?
There are a few different models of Undersink filter that each have their own specific purpose. The most common model of Undersink filter you will come across is a Sediment + Coconut Carbon configuration. As the name suggests, they have a dual action, the first filter will remove dirt/particles and sediment, while the Coconut Carbon filter absorbs chemicals from the water such as Chlorine.
Some systems elect to use a Dual Coconut Carbon Set up to double the contact time with the water. As we know that carbon efficiency is majorly to do with Contact Time adding more carbon to a system can greatly increase its ability to remove hazardous chemicals, Tannins, Tastes and odours.
Can an Undersink Water Filter remove Chloramine?
Chloramine Injection has recently been introduced into many council regions over Australia, including on the Gold Coast where FSA is based. Chloramine presents a number of issues in regards to drinking water including but not limited to; dissolving of heavy metals such as lead into the water, release of ammonia gas and adverse skin reactions. As previously mentioned, the more carbon the better. Chloramine is very hard to remove by normal means and it is removed in 2 staged. The first carbon filter acts to break open the Chloramine which in turn, releases the other various residual gasses into the water, the second carbon can then easily extract and absorb all remaining residuals, effectively removing the dangerous Chloramine from your drinking water.
How often should I change the filter cartridges?
Undersink Water Filter Cartridges should be changed anywhere between 6-12 months. You will usually notice a distinct change in taste of the water if you have the filters in too long. This signifies that the Coconut Carbon Cartridge is no longer working to its full capacity and is beginning to allow residual amounts of chemicals through into your drinking water. As a rule, you should not leave your filters in for longer than 12 months regardless if you are on town OR rain water.
What is filter protection equipment, and do I need to use it?
Filter Protection Equipment is an important part of water filtration. Our products are sourced from experienced and reliable manufacturers and also carry the highest level of certification in the water filtration industry. Regardless of Brand, Make, Model or Country of manufacture, water filtration will ALWAYS be the weakest point in your plumbing. The three main causes of water filtration failure are; Overnight pressure surges, Intense Water Hammer Pressure Impacts, and thermal expansion. All of which can be addressed and prevented with a few simple pieces of equipment. A Pressure Limiting Valve is used to buffer the incoming pressure to the Australian Regulation Pressure of 500kPA. This is the minimum requirement for most insurance and warranty validation and is essential when used on Town mains / municipal water. A Water Hammer Arrestor is a copper tube looking device which is commonly found in the laundry (If you have one). It acts to absorb and dissipate pressure spikes in your water lines. Pressure spikes occur from appliances such as the washing machine or dishwasher and can magnify the water pressure tenfold which can cause serious damage to water filtration components. Water hammer gets the name by the distinct sound you hear when the shockwaves rattle loose copper pipes or worn out valves. This is something that is essential to be addressed immediately before installing water filtration. A Pressure Relief Valve is as it sounds. It is pre-set to open once the pressure reaches 110PSI, shooting that pressure/water down the drain line and easing the pressure in your water filter. This is a requirement if you intend to hook up your water filter to a fridge, chiller or ice maker. They are also a good idea to help relieve residual pressure from pressure surges (even if you have a PLV + water hammer arrestor).
|Product Type||Water Filter|
|Installation / Instruction||Click view to Installation instruction|