You have no items in your shopping cart.
This System Contains:
1x Triple Undersink water Filter System, With filters included.
1x Standard Faucet Tap
1x Opening Handle
1x Installation Kit
1x 7-2K Undersink Ultraviolet Water Sanitation system Complete with lamps and Mounting Clamps
Dimensions (mm): (not including Fittings)
370W x 130D x 400H
This system if mainly for Water tanks, along with creek and dam water sources.
The Ultraviolet Light eradicated 100% of the bacteria and viruses you can commonly find in tank and dam water, leaving you with safe, great tasting drinking water. Standard filtration alone is not enough to remove bacteria and Viruses from the water. You can temporarily acheive this through sanitation with a product such as Hydrasil but this is an ongoing maintainance which can be costly in the long run.
The UV system is low maintainance only requiring a replacement lamp every 12 months and a small cost.
Stage 1: Pleated Sediment Filter 20 Micron (2-6GA)
These filters are a terrific opportunity to purchase extremely high quality filters at a VERY low price. They are best suited for tank water, rivers, creeks or streams. Anywhere where there is a heavy level of debris or sediment in the water, which may cause standard filters to block prematurely.
Pleated filters have up to 20x's more surface area than a standard polyspun filter!
This gives them a higher surface area to catch more debris and a much longer life duration before replacement is necessary. They can be washed and removed tima and time again, until they begin to perforate, then they will need to be replaced.
Stage 2: Poly Spun Sediment Filter 5 Micron (2-2GA)
These cartridges are standard Australian Size. These economical high performance sediment cartridges are constructed from polypropylene which is spun and melted simultaneously. This technique means there is no centre core to restrict filter performance.
These sediment filters are compatible with most liquids and are highly effective for sediment, rust, sand, silt, and algae removal.
Our performance sediment filters have no chemical residuals. They are extremily high permorming, and carry a heavy load of sediment before requiring replacement.
We choose to use these sediment filters over all other types due to:
* high performance
* high flow rate
* high load capacity
* The inabilty to grow bacterial slim
These filters are IDEAL for:
* tank water filtration
* pre carbon filtration
Stage 3: H2BLUE 100% Coconut Carbon Block Filter | ULTRA Grade 0.5 Micron (4-12N)
The introduction of this high grade 0.5 micron carbon block is set to rival the US Made range of 0.5 micron filters and bring some fresh competition into the market place.
For as many years as I can recall if you wanted a 0.5 micron carbon block we had to choose from a range of US manufactured cartridges at an obviously inflated price.
In more recent times the US brands have been manufactured in China or other Asian countries like Singapore or Thailand etc. Based on comments from our customers - and also from our own experience, It's been made pretty clear to us that the Asian manufactured US branded cartridges are no longer top of the tree - but surprise surprise, while the quality has plummeted the prices have remained right up there.
Stage 4: Ultraviolet Water Sanitation (7-2K)
This UV is ideal for drinking water and mounts perfectly on any of our under-sink water filter systems.
The UV is made from 304 stainless for long life and is certified to the new electrical standards now requiring the earthing be applied back through the power supply to the trip switch in the power box.
Before buying any UV system you must check that an earth wire is connected from the UV chamber back to the earth system in the power supply or it's not considered safe or legal under the electrical certification regulations.
Put simply, buy from people who know what they are doing and keep your family safe.
This listing is proof that you can buy locally and still be buying fully certified equipment that any plumber can legally install.
You will not find certified UV system on eBay (Buyer beware)
You will require a 240v power outlet under your sink.
Life time warranty on the filter system and 12 month on the light and power supply. FSA invoice must be retails, no invoice no warranty.
The power supply must be plugged in via a serge protector or warranty will be void.
Due to the nature of the products we sell, a strict return policy is in place. We work with food grade certified materials that must be un-opened and un-used as to be able to be re-sold.
You will receive a credit of equal amount, less the postage cost to send it to you.
If you have any questions about our return policy, please contact us before purchase. This will also help to ensure you purchase the correct product that suits your requirements.
Can I install my Water Filter on my own or do I need a Plumber?
For quality assurance and Insurance reasons, we always recommend using a licenced plumber who is familiar with water filtration. This ensures that the installation runs smoothly and is professional. If you fancy yourself reasonable at DIY type projects, we provide you with all the necessary components and instructions you need to conduct the installation yourself. Our technical support team are contactable during business hours on 1300 888 008 should you have any queries about installation.
Will Undersink Water Filters Remove Fluoride?
Standard Undersink filters will not remove fluoride from the water, we recommend using reverse osmosis as it is the safest, and most effective way of removing Fluoride from the water. There are proclaimed Fluoride Removal Cartridges on the market however they use a material called Activated Alumina which will remove Fluoride up to approx. 80% while the filter is new, but will then rapidly depreciate to the point where it is no longer effective. The other down side to the Activated Alumina cartridges is, they have a tendency to leach heavy metals into the water when the filter ages. If you do not keep a strict routine for filter replacement, it may be introducing dangerous heavy metals into your drinking water.
What are Undersink filters for?
There are a few different models of Undersink filter that each have their own specific purpose. The most common model of Undersink filter you will come across is a Sediment + Coconut Carbon configuration. As the name suggests, they have a dual action, the first filter will remove dirt/particles and sediment, while the Coconut Carbon filter absorbs chemicals from the water such as Chlorine.
Some systems elect to use a Dual Coconut Carbon Set up to double the contact time with the water. As we know that carbon efficiency is majorly to do with Contact Time adding more carbon to a system can greatly increase its ability to remove hazardous chemicals, Tannins, Tastes and odours.
Can an Undersink Water Filter remove Chloramine?
Chloramine Injection has recently been introduced into many council regions over Australia, including on the Gold Coast where FSA is based. Chloramine presents a number of issues in regards to drinking water including but not limited to; dissolving of heavy metals such as lead into the water, release of ammonia gas and adverse skin reactions. As previously mentioned, the more carbon the better. Chloramine is very hard to remove by normal means and it is removed in 2 staged. The first carbon filter acts to break open the Chloramine which in turn, releases the other various residual gasses into the water, the second carbon can then easily extract and absorb all remaining residuals, effectively removing the dangerous Chloramine from your drinking water.
How often should I change the filter cartridges?
Undersink Water Filter Cartridges should be changed anywhere between 6-12 months. You will usually notice a distinct change in taste of the water if you have the filters in too long. This signifies that the Coconut Carbon Cartridge is no longer working to its full capacity and is beginning to allow residual amounts of chemicals through into your drinking water. As a rule, you should not leave your filters in for longer than 12 months regardless if you are on town OR rain water.
What is filter protection equipment, and do I need to use it?
Filter Protection Equipment is an important part of water filtration. Our products are sourced from experienced and reliable manufacturers and also carry the highest level of certification in the water filtration industry. Regardless of Brand, Make, Model or Country of manufacture, water filtration will ALWAYS be the weakest point in your plumbing. The three main causes of water filtration failure are; Overnight pressure surges, Intense Water Hammer Pressure Impacts, and thermal expansion. All of which can be addressed and prevented with a few simple pieces of equipment. A Pressure Limiting Valve is used to buffer the incoming pressure to the Australian Regulation Pressure of 500kPA. This is the minimum requirement for most insurance and warranty validation and is essential when used on Town mains / municipal water. A Water Hammer Arrestor is a copper tube looking device which is commonly found in the laundry (If you have one). It acts to absorb and dissipate pressure spikes in your water lines. Pressure spikes occur from appliances such as the washing machine or dishwasher and can magnify the water pressure tenfold which can cause serious damage to water filtration components. Water hammer gets the name by the distinct sound you hear when the shockwaves rattle loose copper pipes or worn out valves. This is something that is essential to be addressed immediately before installing water filtration. A Pressure Relief Valve is as it sounds. It is pre-set to open once the pressure reaches 110PSI, shooting that pressure/water down the drain line and easing the pressure in your water filter. This is a requirement if you intend to hook up your water filter to a fridge, chiller or ice maker. They are also a good idea to help relieve residual pressure from pressure surges (even if you have a PLV + water hammer arrestor).
|Product Type||Water Filters|