1. See Detail

Twin Undersink Water Filter With 3 Way Mixer Tap Watermark WELS Certified GT1-46W

SKU
GT1-46W MT
In stock
Special Price A$420.00 was A$550.00

WaterMark Certified Housings

These Water Filter Housings are certified to WaterMark Standards AS/NZS 3497 Under the Certificate number 23247. The Mixer Taps are Certified to WaterMark Standards + WELS Regulations in Australia

WaterMark certification is the level of certification required by law for a licensed plumber in Australia to install a water filter system. All products used under this certification will give you peace of mind knowing that your water filter complies with Australian plumbing codes.

Our WaterMark certified filter systems are hand assembled here in Australia and are randomly batch tested to ensure top quality and workmanship for your water filtration products.

Lifetime Warranty - Our Guarantee

This System comes with FSA's Lifetime Warranty*. Buy with peace of mind knowing that you have got the best quality filtration system you can purchase in Australia.

Each Mixer Tap comes with a 1 Year Manufacturers warranty.

Kit Contains:

  • Twin Water Filter System (Filters Installed) 1/4" Ports (Watermark Certified Housings)
  • Opening Spanner
  • Entry T Valve - Compliant to NSF/ANSI 61
  • 2m White Certified Water Filtration Tubing
  • Your Choice of Watermark/WELS Certified Mixer Tap
  • 2x Quick Fit 1/4" Elbows
  • WaterMark Certified 500kPa Pressure Limiting Valve (PLV)
  • 1 Roll of White Thread Tape
  • Plain White Box
  • Comprehensive instructions

The cartridges in this system are standard 10" x 2.5" available through our store or from most hardware stores throughout Australia. Complete system comes new in box, with 1x quality 5 Micron Sediment pre-filter and 1x 1 micron top of the range 100% Coconut Carbon block filter for total reduction of chlorine taste and odour issues. 

To ensure that you protect your equipment from pressure spikes we recommend installing a water hammer arestor which you can purchase

HERE

The pressure limiting valve should be routinely replaced every 2 years to ensure your system is protected. You can purchase these

HERE

We also offer a low cost anti leak shut off device that will prevent flooding should any component fail, you can purchase these

HERE

Your Choice Of Mixer Tap

Our NEW sleek and simplistic range of mixer taps performs all the necessary tasks required in any modern kitchen. They produce ample supply of clean fresh water for drinking, food preparation, cooking and more, all with the flick of a lever. Ceramic Disc Valve Technology for smooth, durable action. Complies with AS/NZS 3718 (Watermark Certification) and WELS Regulations

GT9-14 - Standard 3 Way Mixer (Photo 2)

GT9-15 - Standard Slim 90° Modern Mixer (Photo 3)

GT9-16 - Stylish Goose Neck Mixer (Photo 4)

GT9-17 - Standard Goose Neck Mixer (Photo 5)

GT9-15BL - Black Finish Standard Slim 90° Mixer (Photo 6)

GT9-16BL - Black Finish Stylish Goose Neck Mixer (Photo 7)

Inlet Tee - Compliant to NSF/ANSI 61

Gone are the days of struggling to get the right amount of thread tape onto your fittings (such as the feed water block and brass ball valve). Now, thanks to this handy combination fitting, it's simply a matter of interrupting your cold-water line with this tee and plugging in the 1/4" tubing to the filtration system.

The other benefit of this fitting is that by having the built-in isolation switch you can easily turn the water on and off for cartridge changes.

5 Micron Polypropylene Spun Sediment Filter

Poly Spun is the best type of filtration you can get. They do not accumulate bacteria as much as other materials, as well as being high flow and low pressure drop. Effective in all applications. 5 micron is a reasonably fine filtration and would be suited on high quality bore water or town water or infront of RO's.

100% Virgin Polypropylene material - Compatible for Our Watermark Certified Systems

Purefer Polypropylene filters are made using a unique single nozzle manufacturing process, where a single nozzle blows melted polypropylene onto a spinning 5 micron filter core. As more Polypropylene is blown, the filter diameter gradually widens and the outer density of the filter decreases.

This unique manufacturing process gives Purefer filters a true Gradient Density that allows for a greater dirt holding capacity and higher filtration efficiency compared to standard melt blown filters made from multiple nozzle blowers.

1 Micron 100% Coconut Carbon Filters

This high quality 100% Coconut Carbon filter is the exact filter we use as our front-line carbon filter. As a rule, it is difficult to find 100% coconut carbon filters. Most lower priced filters on the market are a blend of coconut carbon and coal based carbon. The problem with coal based carbon is that it has a shorter life and often results in a less palatable flavour. We use this 100% coconut carbon filter in all of our pre-assembled kits. They are top of the range HIGH QUALITY coconut carbon block filters, ideal for taste and odour issues, and perfect for total extraction of town water chemicals. 

This particular filter is currently supplied throughout the European market as a premium drinking water filter, and we are in a prime position to offer you this high-quality filter at rock bottom prices, direct from importer to the public. 
The perfect carbon block filter is made from 100% Coconut Shell Carbon, which creates what many believe to be sweetest tasting water. The unique pore structure of this carbon is well suited for chemical absorption, including VOC's, while reducing chlorine and chemicals that contribute to taste and odour. 

Dimensions

Height: 358mm
Width: 240mm
Depth: 125mm

Specifications

Housings: 10" x 2.5"
Max Flow Rate: 4L/Min
Max Working Pressure: 70psi - 500kPa
Max Inlet Pressure: 125psi
Tested Pressure: 325psi
VOC Reduction: >95%
Chlorine Reduction: 30,000L @ 3.8L/Min

Tap Specifications:

GT9-14

Spout Reach From Centre Of Tap: 230mm
Height Of Outlet From Tap Base: 120mm
Deck Hole For Installation: 36mm

GT9-15 & BL

Spout Reach From Centre Of Tap: 200mm
Height Of Outlet From Tap Base: 290mm
Deck Hole For Installation: 36mm

GT9-16 & BL

Spout Reach From Centre Of Tap: 210mm
Height Of Outlet From Tap Base: 215mm
Deck Hole (Installation): 36mm

GT9-17

Spout Reach From Centre Of Tap: 210mm
Height Of Outlet From Tap Base: 215mm
Deck Hole (Installation): 36mm

 

 

Due to the nature of the products we sell, a strict return policy is in place. We work with food grade certified materials that must be un-opened and un-used as to be able to be re-sold.

You will receive a credit of equal amount, less the postage cost to send it to you. 

  • Wrongly purchased items may be returned for a merchandise credit, this applies for but not limited to: Wrong size, wrong system etc.
  • 30 Day return Policy: We will accept returns up to 30 days after the initial purchase, all orders should be checked immediately for damage/fault upon arrival to aid us with the return process.
  • Return shipping is to be paid by the buyer to the address provided
  • Should the item appear faulty or doesn’t work how described, the unit/item must be returned for testing (if requested), the return postage paid by the buyer. If the unit/item is deemed to be faulty, compensation will be provided for the postage cost. If the unit/item is deemed to be in working order and as described, the buyer will need to pay for return postage. 

If you have any questions about our return policy, please contact us before purchase. This will also help to ensure you purchase the correct product that suits your requirements.

More Information
Product Type Water Filter
apex-logo
jg-logo
pentak-logo
Haycarb-logo
omnipure-logo
uvg-logo
pure-lite-logo
Hydrasil-logo
Blue-logo
Molytec-logo
FSA-de-min-logo
THERMAX-logo