1. See Detail

Commercial Stainless-Steel Bag Filter System #1 304SSS | 15m³/Hr* HPF-SS-1

In stock
Quick Overview
  • Commercial Electroplated 304 Stainless-Steel Bag Filter
  • EDPM Seals for High Resistance to Chemicals, Oils and High Temperature
  • 2" BSP Ports - Suitable for Plumbing use in Australia
  • Adjustable Leg Height to suit different applications
  • Relief Valve with Working Inlet Pressure Gauge
  • Mounting Strainer with 1/8" Holes - Suits Standard #1 Bags
  • Eye Bolt for Lid Fastening
4 Interest Free Payments of $750.00

Commercial Bag Filter System

This bag filter system is compatible with most standard size #1 filter bags. Supplied standard with 2" BSPT-F ports for easy commercial applications without the need for NPT to BSP adaptors. The inlet and outlet are configured with the inlet on the top side and the outlet at the base of the filter, marked accordingly.

The full-body construction of this system including the internal basket element is made from commercial-grade, acid washed, electro-polished 304 Stainless-Steel making it suitable for domestic and commercial applications including drinking water.

The top seal is a heavy-duty EPDM Gasket for increased resistance to chemicals and oils and has a higher temperature resistance. This seal is used with a heavy-duty screw clamp for a positive seal.

The HPF-SS-1 is considered a high pressure bag filter suitable for applications not exceeding 1600 kPa (225 psi). It is also suitable for domestic or commercial hot water/liquid filtration up to 80°C

For applications over 38°C please contact us to get the correct Nylon or Polyester Filter Bag.

Kit Contains

  • Commercial 304SS Bag Filter Housing
  • Mounting Legs x3 (Pre-fitted with a ring clamp for adjustment)
  • Internal SS Filter Basket with 1/8" Holes for high flow rate


As per Australian Plumbing Standards, this unit must be installed by a Qualified Plumber in accordance to the manufacturer’s instructions and requirements. Failure to follow these guidelines may void warranty and insurance.

Mounting The System

This filter housing will require a vertical installation on a solid flat surface.

If installing this system on a flat slab, ensure that the slab is at least 100 x 100 (cm) for structural stability. Locate the correct mounting position and adjust leg height by loosening the bolts clamping the legs to the system. When in the desired position, re-tighten the bolts firmly.

Plumbing The System

As with all filtration, it is always recommended to install a bypass around the filter and add isolation valves before and after the system for easy maintenance. Not only will this simplify filter changes, but it will also allow you to maintain unfiltered water flow should there be an issue with the unit, or if the filter is not required at that time.

Ensure that there is a 1-way check valve installed to prevent vacuum on the housing. Excessive vacuum may damage the housing or components.

Using Filter Bags

The stainless-steel bag filter system has an internal SS 304 basket for housing the filter bag. This basket provides structural support for the filter bag to avoid perforation or tearing, resulting in a bypass. The filter bag should be unfolded and placed into the basket, with the rim of the filter bag touching the lip of the basket.

When under water pressure and flow, the filter bag will be forced into the basket and the bag will inflate to provide maximum surface area for filtration. The pressure and flow will seal the filter bag against the rim and prevent raw water bypass.

Filter bags are designed to be cleaned and re-used until their structural integrity has been compromised or the filter material has been saturated.

More Information
Type Water Filter

Working Specifications

Max Pressure: 16 BAR (225 psi)
Temperature: 1°C - 80°C
Max Flow: 15m³/Hr (250L/Min)* Dependent on Bag Selection & Water Quality
In/Out Ports: 2" BSPT-F
Vent Port: 1/4" BSP-F
Drain Port: 1/2" BSP-F

System Dimensions

See Attachment

Return Policy

Due to the nature of the products we sell, a strict return policy is in place. We work with food-grade certified materials that must be un-opened and un-used, so as to be able to be re-sold. This policy falls in line with the Australian Consumer Law, which is designed to protect BOTH BUYERS AND SELLERS. 

You may receive a refund or credit of equal amount, less the Restocking/Out-of-Pocket Shipping Expense Fee, if applicable, and any other deductions that are relevant. 

  • 30-Day Returns Policy: Returns will not be accepted without prior approval or after 30 days of the invoice date.

  • Wrongly Purchased Items/Changes of Mind Policy: Wrongly Purchased Items, or Change of Mind Purchases may be returned for a merchandise credit. This applies to, but is not limited to purchases of products that are:
    • The Wrong Size;
    • The Wrong System;
    • The Wrong Replacement Pack;
    • Due to a Change of Mind;
    • Due to Buyer Error, whereby the buyer has failed to conduct proper due diligence (including contacting FSA prior to purchase in order to clarify the relevant technical specifications, compatibility, requirements etc.) to ensure the product purchased from us is the correct product for their requirements.
  • Restocking/Out-of-Pocket Shipping Expense Fees Policy: All returns will incur a 17.5% restocking fee OR an out-of-pocket shipping expense fee, whichever is greater. 
    • This fee is in place to cover the administrative expense incurred in processing the return and/or the out-of-pocket expenses incurred by us in shipping the item to you. FSA may use its discretion to determine the restocking fee. Please note this policy falls in line with the ACL, and is designed to protect us as the seller from losses incurred due to buyer error. This means that you will NOT receive a full refund of the original purchase price - you will bear the cost of shipping the product back to us, and then you will receive a credit equal to the purchase price of the product LESS the Restocking/Out-of-Pocket Shipping Expense Fee. Please refer to our Shipping Policies (below) for further clarification.
    • Low-Value Returns: Please note that with low-value items, sometimes the cost of sending the item back to us may be more expensive to you, than simply keeping the item. For example, let's say you have ordered 3x meters of the wrong-sized tubing for your needs and paid $12.00. If, for example, it cost us $7.69 to send the item to you, and it would cost you $7.69 to send the item back to us, overall you would be $3.38 worse off (due to incurring $7.69 to send the item back to us, and having $7.69 taken out of the credit) than if you had kept the item and re-ordered the correct product for your needs. 

  • Shipping Policies: 
    • Free Shipping Offer: As part of our offer of Free shipping Australia-Wide, FSA reserves the right to select the most cost-effective courier to effect delivery of the product to you. We make no guarantee as to how long an item will take to arrive due to unforeseen circumstances outside of ours/the couriers' control, including but not limited to: Staff Shortages, Supply Chain Demand, Extreme Weather Events etc.
    • Express Shipping Policy: If you require an item on an urgent or Express basis, it is your (the buyer's) responsibility to contact us directly by telephone on [phone removed by eBay] prior to purchase, in order that we may quote you the options available for Express Delivery to your nominated address, and to organise additional payment for this Express Service. Express Shipping is not included in our offer of free shipping - this service will come at an additional cost payable by the buyer. 
    • Late Shipping Policy: Given that we offer the option for customers to organise Express Shipping with us prior to purchase, cancellations or refunds will NOT be issued on the basis of late or delayed shipping where the customer has opted for our Free Shipping offer. If the item (sent via Free Shipping), arrives late and the buyer wishes to return the item on this basis, the buyer will be liable for the cost of returning the product to us and a Restocking/Out-of-Pocket Shipping Expense Fee will be applicable to the return, as per the listed returns policy line items above. The customer will be issued a merchandise credit.
    • Our offer of Free Shipping does not apply to Returns: Whilst we offer Free Shipping, this does not mean that there is no cost to ship the product - obviously, a shipping expense is incurred, and as with all e-commerce operators that offer Free Shipping, the cost of shipping the product from our warehouse to your nominated shipping address is built into the price of the product. The offer of Free Shipping therefore only applies to the act of FSA supplying the product to you, and does not cover the cost of returning the product from the customer to FSA.
    • Returned to Sender Items: In the case of the buyer being unavailable to sign, refusing delivery, or the item being sent back to us for whatever reason, FSA may, at its discretion, pass the cost of the product being Returned to Sender (i.e. being returned back to us), back onto the buyer. Refer to Restocking/Out-of-Pocket Shipping Expense Fees (above).
    • Lost Parcels: If an item is deemed to be LOST IN TRANSIT by the courier, the customer is entitled to a replacement product or refund in line with the ACL. In the case of a replacement product, FSA reserves the right to send the replacement product in line with its Free Shipping offer. If you do require the replacement item urgently, please get in touch with our customer service team directly to organise Express Shipping. 

  • Product Damage & Product Faults: Any damage to products that are not reported to FSA within 48 business hours of receipted delivery is not covered under our transit warranty. Return shipping is to be paid by the buyer to the address provided by FSA. It is recommended that the customer applies a transit warranty to the return freight item/s, in case of damage.
    • Faults: Should the item appear faulty or doesn’t work as described, you must supply written/photographic/video evidence of the fault to us, so that we may assess whether the unit/item must be returned for testing (if requested). If testing is requested, return postage is to be paid by the buyer. 
      • If the unit/item is deemed to be faulty, compensation will be provided for the postage cost (proof of cost required). 
      • If the unit/item is deemed to be in working order and as described, the buyer will be responsible for the cost of return postage of the product from FSA's premises, back to the buyer. 
    • Minor Damage: Any damages (minor, that can be repaired) will incur a fee, that will be deducted from the total refund which will be equal to the cost of the replacement parts (List Price) and labour charges (if applicable) to repair the system(s). This will be separate from the Restocking/Out-of-Pocket Shipping Expense Fees.
    • Major Damage: Any damage considered to be major and not feasible for repair may be refused and the return request will be void. The customer will be responsible for the return freight or disposal of the damaged unit.

Returns are not accepted on special order items unless the manufacturer allows it. Applicable fees will apply.

If you have any questions about our return policy, please contact us before purchasing. This will also help to ensure you purchase the correct product that suits your requirements.