FREE SHIPPING AUSTRALIA WIDE
Free shipping on all retail orders
AUSTRALIAN OWNED & OPERATED
Licenced WaterMark Supplier
Quick Change Shower Water Filter | Reduces Chlorine, Chemicals & Heavy Metals (GT39-17)
Quick Change Shower Water Filter | Reduces Chlorine, Chemicals & Heavy Metals (GT39-17)
The new and improved formula contains Calcium Sulfite & FAR Infrared Filter media for superior Chlorine Reduction for showers.
The new 'Quick Change' Filter design makes ongoing maintenance a simple task. Simply twist off the old filter and twist on the new filter. No need for a Plumber or handyman - saving you money!
Calcium Sulfite (CaSO3):
Calcium sulfite is 100 times more effective than activated carbon at reducing chlorine and heavy metals such as lead, mercury, cadmium, and aluminium.
FAR Infrared:
Far Infrared Ceramic balls release a weak electric current (0.06 mA) (which is similar to the body's natural current) along with trace elements such as lithium, iodine and selenium. Because they release up to 0.06mA of Bioelectricity into the water, this helps in breaking down bigger molecule groups of water into smaller ones, essentially "activating" the water and providing a mildly alkaline pH.
Replacement Filters
Cartridges can last 2-6 months depending on water quality and usage volume. To replace your cartridge simply turn off your mains water supply and unscrew the shower hose from the filter. Take off the outer casing pull out the old cartridge and put in the new one. Then screw the casing back on and screw the shower hose back onto the filter.
Before Purchase/Installation:
- Do not use with microbiologically unsafe water or water of unknown quality without adequate disinfection before or after the system.
- Operation Pressure must not exceed 500 kPa. If the pressure exceeds this, you must install a pressure limiting device before the tap.
- This device is designed to be used on standard ½” BSP threads. This is a standard size for most showers in Australia.
- Water quality may affect the life of the filter cartridge, this can become an indication of when you require a cartridge change if the filter blocks before the recommended replacement time.
- Prior to usage, it is recommended to run the water briefly in to ensure the filter has been flushed and fitted correctly.
- The maximum temperature of this water filter is 55°C. Not for use with straight Hot Water. Using Hot water on this filter for extended periods may cause damage or failure and void warranty.
Installation:
- Remove the existing shower head from the wall fitting (1/2”).
- Identify if the Elbow Adaptor is required for installation. An Elbow adaptor is commonly used when the wall fitting does not come straight out (i.e. the fitting runs parallel to the wall).
- Apply 6 rounds of thread tape to the male wall fitting to ensure the filter seals.
- Screw the shower filter onto the wall fitting, paying attention to the flow direction of the arrow on top. CAUTION: Go slowly to avoid cross-threading.
- DO NOT overtighten the filter, doing so may crack the thread. If leaking occurs, remove and re-apply 8 rounds of thread tape.
- Apply 6 rounds of thread tape to both sides of the ½” Male-Male Joiner and insert the Long Side of the joiner directly into the outlet of the shower filter. Hand tightening is sufficient for now.
- Screw the shower head onto the exposed male thread and tighten it. Both sides will tighten at the same time, stop when the seal is tight and the shower head is in the correct orientation.
- Run cold water through the filter for 1 minute and check for leaks in the thread joins of the filter.
- Turn the tap off and remove the filter cartridge by twisting it anti-clockwise.
- Set the filter reminder to 3 months in advance as a filter change reminder, replace the filter and it is ready to use.
Filter Change:
- While the water is turned off, simply twist the filter anti-clockwise to release it.
- Discard the old filter and replace it with the new filter by twisting it in clockwise.
- Flush the filter for 1 minute.
Troubleshooting:
- Q: Water Leaking from threaded Connections
A: Re-apply more thread tape OR remove thread tape and re-install with silicone washer. - Q: Slow Flow rate.
A: Filter Requires Replacement, OR Check to see if any debris in filter or shower head. - Q: Taste or Odour Issue in water
A: If the filter is new, allow a longer flushing time. If the filter is older – replace the filter.
Specifications:
Size: H 155 x W 70 x D 65 (mm)
Use: Municipal (Chlorinated)
Temp: 5°C – 55°C
Pressure: 100 kPa – 500 kPa
Filter: Calcium Sulfite (55g), FAR Infrared Balls (65g)
Material: ABS
Flow Rate: 9L/Min @ 350 kPa
Life: 3 Months
Harsh Water May reduce filter life
Chlorine Removal: 89% Initial Reduction – 55% after 27,000L
(Based on influent of 1 ppm Free Chlorine)
Return Policy
Due to the nature of the products we sell, a strict return policy is in place. We work with food grade certified materials that must be un-opened and un-used as to be able to be re-sold.
You may receive a refund or credit of equal amount, less the restocking fee if applicable and any other deductions that are relevant.
- Wrongly purchased items may be returned for a merchandise credit, this applies for but not limited to: Wrong size, wrong system etc.
- 30 Day return Policy: Returns will not be accepted without prior approval or after 30 days of invoice date.
- All returns will incur a 17.5% restocking fee or cost to send the item to you whichever greater. FSA may use discretion to determine the restocking fee.
- Any damages (minor, that can be repaired) will incur a fee which will be deducted from the total refund which will be equal to the cost of the replacement
parts (List Price) and labour charge (if applicable) to repair the system(s). This will be separate to the restocking fee. - Any damage considered to be major and not feasible for repair may be refused and the return request will be void. The customer will be responsible for the return freight or disposal of the damaged unit.
- Return shipping is to be paid by the buyer to the address provided. It is recommended that the customer applies transit warranty to the return freight in case of damage.
- Any damages to the system that were not reported to FSA within 48 business hours of receipted delivery are not covered under our transit warranty.
- Should the item appear faulty or doesn’t work how described, the unit/item must be returned for testing (if requested), the return postage paid by the buyer. If the unit/item is deemed to be faulty, compensation will be provided for the postage cost (Proof of cost required). If the unit/item is deemed to be in working order and as described, the buyer will responsible for return postage.
If you have any questions about our return policy, please contact us before purchase. This will also help to ensure you purchase the correct product that suits your requirements.