1. See Detail

6 Stage Hydrogen Rich Reverse Osmosis Water Filter 1 Year Replacements GT1-11SH

In stock
4 Interest Free Payments of $38.38

Replacement Pack Suited to the NEW 6 Stage Portable Hydrogen Rich Reverse Osmosis Water Filter System

  • Stage 1: Inline GAC Carbon Pre-Filter 5 Micron
  • Stage 3: T300 Hydrogen-Rich Water Filter Cartridge 1 Micron
  • Stage 5: Purefer Inline Carbon Filter 5 Micron

Changing your filters:

Inline water filter cartridges are very simple to install and dismantle. As the name suggests, the water flow is inline which means that either end of the cartridge contains a fitting to accommodate tubing.
When changing filters on the 6 stage Shuttle, we recommend taking a photo of the system from various angles, then one by one, changing the cartridges. This will help you remember the orientation of the filters and the flow direction and may save you time trying to put the filter back together from scratch.

  1. Using Push-Fit Connections: These connections are very easy to use however if you have not used them before, may be a little tricky at first. To remove the tubing, depress the floating collet, then pull on the tubing and it should release. When re-installing, you need to firmly push the tubing into the opening until you feel a “click” which signifies that the tubing has pushed through the internal O-ring and is seated correctly. If leaking occurs, it may be due to roughly cut tubing OR the tubing is not pushed in far enough. See images to the right for visual instruction on push fit connectors.

  2. Installing Fittings: All fittings, excluding the membrane housing fittings (1/8"), come with an o-ring fitted to seal the connection. For quality assurance and extra security, when the fittings are installed, we apply 6-8 rounds of standard white plumbing tape to the fittings. It is recommended that you also apply thread tape when re-installing fittings to help prevent leaks over time. Ensure that you remove all thread tape (as best you can using a stanly knife) without damaging the thread of the fitting, then apply approx 6 rounds of thread tape. If you experience any leaks or cross threading, the fitting may require replacement and can be purchased from our store. You will require a shifter to install these fittings.

  3. System Restart: When the new filters are installed, you will then need to flush the system again. Much the same as when you first use the system. Disconnect the tubing from the screw cap end of the membrane and flush the water through the pre-filter (stage 1) for approx 1-2 minutes, shaking the filter frequently to loosen any carbon fines. When this has been completed, reconnect the system and run for about 15-20 minutes to flush out the remaining filters. HINT: If you can, plug each filter directly into the inlet line and flush it straight off the kitchen tap pressure. This will greatly shorten the flushing times.

T300 Hydrogen Rich Water Filter (GT6-32)


Made from pure Magnesium

Certification 2008 FDA No. 163-28666-872

Service Life: 12 Months or 4,000L

Max Flow: 2.8L/Min

Max Pressure: 125 PSI

Max Temp: 55°C


Made In Taiwan


Inline Carbon Taste & Odour Filter (GT6-1)



NSF/ANSI 42 Certification

Service Life Stage 1: 6 Months or 2,000L
Service Life Stage 5: 12 Months or 4,000L

Max Flow: 2.8L/Min

Max Pressure: 125 PSI

Rating: 5 Micron Nominal


Return Policy

Due to the nature of the products we sell, a strict return policy is in place. We work with food grade certified materials that must be un-opened and un-used as to be able to be re-sold.

You may receive a refund or credit of equal amount, less the restocking fee if applicable and any other deductions that are relevant. 

  • Wrongly purchased items may be returned for a merchandise credit, this applies for but not limited to: Wrong size, wrong system etc.
  • 30 Day return Policy:  Returns will not be accepted without prior approval or after 30 days of invoice date.
  • All returns will incur a 17.5% restocking fee or cost to send the item to you whichever greater. FSA may use discretion to determine the restocking fee.
  • Any damages (minor, that can be repaired) will incur a fee which will be deducted from the total refund which will be equal to the cost of the replacement 
    parts (List Price) and labour charge (if applicable) to repair the system(s). This will be separate to the restocking fee.
  • Any damage considered to be major and not feasible for repair may be refused and the return request will be void. The customer will be responsible for the return freight or disposal of the damaged unit.
  • Return shipping is to be paid by the buyer to the address provided. It is recommended that the customer applies transit warranty to the return freight in case of damage.
  • Any damages to the system that were not reported to FSA within 48 business hours of receipted delivery are not covered under our transit warranty.


  • Should the item appear faulty or doesn’t work how described, the unit/item must be returned for testing (if requested), the return postage paid by the buyer. If the unit/item is deemed to be faulty, compensation will be provided for the postage cost (Proof of cost required). If the unit/item is deemed to be in working order and as described, the buyer will responsible for return postage. 


If you have any questions about our return policy, please contact us before purchase. This will also help to ensure you purchase the correct product that suits your requirements.