Free shipping on all retail orders


Licenced WaterMark Supplier

  • Dual Carbon 10" x 2.5" Replacement Water Filters
  • Designed for removal of Monochloramine from Town water
  • Maximum removal of Chemicals, VOC's and Taste & Odour
  • 20 Micron Low Pressure Drop Pre Filter - Coconut Carbon
  • 0.5 Micron Chloramine Reduction Filter - Catalytic Coconut Carbon
  • High Iodine count - increased Chemical absorption 

This is the filter pack to suit our Maximum Chemical Reduction Twin Undersink Chloramine Water Filter for Mains Water (GT1-46WM).

Dual Coconut Carbon Filtration

Chlorine is becoming more of a difficult chemical to remove from water these days due to the additives and fortifiers being used to increase the effectiveness of chlorine & residual chlorine in municipal town water. Free chlorine can be easily removed from water with minimal contact time, however now most municipal water supplies in Australia are using Monochloramine. Monochloramine is an ammonia bonded Chlorine molecule (NH2Cl) which is an inorganic compound. While monochloramine is noted to produce lower (but still present) levels of chlorocarbons and carbon tetrachloride levels, there are other known health risks that can be far more serious.

Adding Chloramine to the water supply can increase exposure to lead in drinking water, especially in areas with older infrastructure. Australia has a large percentage of old buildings where this can be a serious risk. In some cases with older buildings, it has been noted that the mixture of monochloramine and Fluorosilicic Acid can even dissolve metals such as copper pipes, causing green/blue staining in the water and damaging plumbing.

LPD 2510-20 Low Pressure Drop Coconut Carbon

Pure's LPD range of Coconut Carbon filters are increasing in popularity on the filtration market due to their unique properties. The 20 Micron rating allows the sediment/particle capacity to increase, ensuing the filter goes the distance as a pre-filter. To compensate for the lack of micron filtration, the LPD carbon filters use a higher iodine count coconut carbon media to increase its chemical absorption capacity. The LPD carbon soaks up any free chlorine, VOC's and taste/odour in the water and takes load of the final 0.5 micron catalytic carbon filter.

CRC 2510-P5 Chloramine Reduction Catalytic Carbon

Pure's CRC range of Coconut Carbon filters are a market leader when it comes to the reduction of monochloramine from municipal water. Boasting a 0.5 micron nominal rating, this filter has a huge advantage due to the highly reactive surface area of the composite carbon designed to denature and neutralise chloramine with minimal contact time. With a huge chlorine filtration capacity of 95,000L it rivals other brands even in the 20" x 4.5" size for its holding capacity and performance. The filter is capable of reducing the maximum level of monochloramine for 3,800L - easily achieving a filter life of 12 months at over 10L per day of filtration.


Filter Size: 10" x 2.5"
Micron Rating: 20uM - 0.5uM Nominal
Flow Rate: Max 7.5L/Min
Recommended Flow Rate: 3.8L/Min (Standard Drinking Water Tap)
Filter Life: 12 Months

GT4-6LPD - Low Pressure Drop
Chlorine Taste & Odour Reduction: 13,200L @ 3.8L/Min
Pressure Differential: 1.25 psid @ 3.8L/Min
GT4-6CRC - Chloramine Carbon
Chlorine Taste & Odour Reduction: 94,500L @ 3.8L/Min
Chloramine Reduction: 3,785L @ 1.9L/Min
Pressure Differential: 4.0 psid @ 3.8L/Min

Return Policy

Due to the nature of the products we sell, a strict return policy is in place. We work with food grade certified materials that must be un-opened and un-used as to be able to be re-sold.

You may receive a refund or credit of equal amount, less the restocking fee if applicable and any other deductions that are relevant.

  • Wrongly purchased items may be returned for a merchandise credit, this applies for but not limited to: Wrong size, wrong system etc.
  • 30 Day return Policy: Returns will not be accepted without prior approval or after 30 days of invoice date.
  • All returns will incur a 17.5% restocking fee or cost to send the item to you whichever greater. FSA may use discretion to determine the restocking fee.
  • Any damages (minor, that can be repaired) will incur a fee which will be deducted from the total refund which will be equal to the cost of the replacement
    parts (List Price) and labour charge (if applicable) to repair the system(s). This will be separate to the restocking fee.
  • Any damage considered to be major and not feasible for repair may be refused and the return request will be void. The customer will be responsible for the return freight or disposal of the damaged unit.
  • Return shipping is to be paid by the buyer to the address provided. It is recommended that the customer applies transit warranty to the return freight in case of damage.
  • Any damages to the system that were not reported to FSA within 48 business hours of receipted delivery are not covered under our transit warranty.

  • Should the item appear faulty or doesn’t work how described, the unit/item must be returned for testing (if requested), the return postage paid by the buyer. If the unit/item is deemed to be faulty, compensation will be provided for the postage cost (Proof of cost required). If the unit/item is deemed to be in working order and as described, the buyer will responsible for return postage.

If you have any questions about our return policy, please contact us before purchase. This will also help to ensure you purchase the correct product that suits your requirements.